Brother International Entrepreneur PR-650 Users Manual - English - Page 252

APPENDIX Oiling the machine In order to extend the life of the embroidery machine's parts and keep the machine operating correctly, be sure to oil the machine before the first time that it is used. If too little oil was applied to the race, an error message may appear. Afterward, put a drop of oil onto the hook once a day before use, and put a drop of oil to the lower needle bar felt washer every 40 to 50 hours of machine use. ■ Oiling the race Turn off the embroidery machine. 1 Rotate the handwheel (about 50 degrees) to 3 move the race of the hook to a position where it can easily be oiled. 1 Handwheel • Be sure to rotate the handwheel toward the LCD panel (counterclockwise). Put a drop of oil onto the hook. 4 CAUTION ● Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. Open the hook cover, and remove the 2 bobbin case. (Refer to page 36, 37.) Front angle view Side view 1 Punch a small hole in oil bottle. 2 Apply oil here. • Use a pointed object to punch a small hole in the tip of the included oiler before using it. After oiling, insert the bobbin case into the 5 hook, and then close the hook cover. (Refer to page 36.) 250