Brother International Entrepreneur PR-650 Users Manual - English - Page 28

GETTING READY Setting up the machine When setting up the machine, adjust the legs so that the machine is steady. Make sure that all packing tape affixed to the 1 machine is peeled off and that all packing material is removed. Set up the machine while making sure that 2 there is sufficient space around it. More than 50 mm (2 inches) Use the included wrench to turn the 4 adjustable foot nut on the foot. Turning the nut in direction 1 lengthens the leg; turning the nut in direction 2 shortens the leg. 589 mm (23-3/16 inches) More than 350 mm (13-3/4 inches) More than 512 mm More than 250 mm (20-5/32 inches) 250 mm (9-7/8 inches) (9-7/8 inches) Adjust the legs so that the machine is steady. 3 Use the included wrench to loosen the lock nut on the leg that you wish to adjust. 1 Adjustable foot nut • Adjust all four legs so that they securely contact the desk or table. After adjusting the legs to the desired length, 5 use the included wrench to tighten the nuts. 1 Lock nut Press down on each corner of the 6 embroidery machine to check that it is stable. If it is still unstable, perform steps 3 through 5 again to adjust the legs. 1 Lock nut 2 Adjustable foot nut X The foot can be turned. 26