Brother International Entrepreneur PR-650 Users Manual - English - Page 40

EMBROIDERING TUTORIAL 2. Turning ON the Machine Connect the power supply cord, and then turn on the embroidery machine. For precautions concerning the power supply, refer to page 32. Plug the power supply cord into the 1 machine. Touch . 5 Insert the plug of the power supply cord into 2 a household electrical outlet. X The pattern type selection screen appears, and the start/stop button lights up in red. The carriage moves to its initial position. 6 • If the number 1 needle bar is not already at the embroidering position, the needle bar case moves and the number 1 needle bar moves to the embroidering position. CAUTION ● Make sure to keep your hands and other items away from the carriage, in order to prevent any injuries. Switch on the main power switch on the 3 back of the machine to "I". Memo ● If the machine is turned off in the middle of embroidering, the machine will automatically save the design position when turned on again. At that time, you will be asked if you wish to continue embroidering or begin a new operation. (Refer to "Resume Embroidering After Turning Off the Machine" on page 110.) X The LCD screen comes on. When the machine is turned on, the opening 4 movie is played. Touch anywhere on the screen to display the message below. 38