Brother International Entrepreneur PR-650 Users Manual - English - Page 70

EMBROIDERING TUTORIAL 13. Removing the Embroidery Frame and Fabric After sewing is finished, remove the embroidery frame, and then remove the fabric from the frame. Removing the embroidery frame Pull off the embroidery frame toward you. 2 CAUTION ● When removing the embroidery frame, make sure that the start/stop button is lit in red. If the start/stop button is flashing in green, the machine may start sewing. If the machine accidentally starts operating, injuries may result. ● When removing the embroidery frame, be careful that the embroidery frame does not hit any other part of the machine. ● Do not lift up the embroidery frame holder with extreme force, otherwise it may be damaged. With both hands, grab the left and right sides 1 of the arms of the embroidery frame holder, and then slightly lift up the frame. The pins on the arms of the embroidery frame holder should come out of the holes in the sides of embroidery frame. Removing the fabric Loosen the outer frame screw. 1 X If the screw was tightened using a discshaped screwdriver, use the included discshaped screwdriver to loosen it. Remove the outer frame, and then remove 2 the fabric. 68