Brother International Entrepreneur PR-650 Users Manual - English - Page 81
When You Have a Question, This May Help
View all Brother International Entrepreneur PR-650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
When You Have a Question, This May Help You TECHNICAL TERMS: PATTERNS: ■ DST Following patterns can be processed by the This is the extension of Tajima data file (*.dst) machine to embroider. that is one of the data formats of embroidery - Embroidery data with *.pes, *.phc or *.dst patterns. Tajima data does not contain color format. information, therefore the embroidery machine automatically assigns colors when a Tajima Use USB media to transfer the data to the machine. 2 (.dst) file is loaded. (Refer to page 220.) Using the USB cable, the data can be transferred ■ Needle number The needles are numbered from right to left. The far right needle is number 1 needle. (Refer to page 8.) from the PC to the machine. - Optional embroidery cards - Embroidery patterns created by digitizing software program - The patterns saved on USB media by the ■ Needle at the "embroidering position" machine This is the needle that is placed above the needle hole in the needle plate. The needle bar case is moved to position that particular needle EMBROIDERING: with the next thread color to the "embroidering position". Also when using the needle threader, the needle that is going to be threaded should be moved to the "embroidering position". (Refer to page 61 and page 62.) ■ Customize the embroidery colors - Use the thread color function by selecting either 64 colors or 300 colors, or by setting the custom thread color table on the pattern editing screen. For more details, see page 176 and page 179. - Use the "Temporary needle bar setting" function by selecting the key on the "embroidering" screen. More details please see the page 130. ■ Resume an unfinished pattern from the last time the machine was switched off. - The machine remembers the pattern and the position even after turning off the power. And the machine can resume the embroidery when the machine turns on again. (Refer to "Resume Embroidering After Turning Off the Machine" on page 110.) 1 Needle 2 Needle hole in the needle plate ■ Wiper This is the mechanism for pulling the thread. The wiper pulls the thread when the needle threader is used. The wiper also pulls the thread from the material when the machine trims the thread. This makes trimming threads after embroidering unnecessary. (Refer to page 60.) When You Have a Question, This May Help You 79