Brother International Entrepreneur PR-650 Users Manual - English - Page 82

EMBROIDERING TUTORIAL ■ Getting false thread breakage error - Check that the position of the upper thread is under the upper thread guide plates. (Refer to page 56.) - Check that the position of the upper thread is around the thread tension disc. (Refer to page 57.) USB connectivity You can perform many functions using the USB ports on the machine. Connect the appropriate devices according to the feature of each ports. 1 Upper thread guide plates 2 Thread tension disc ■ Thread tension changed suddenly - Thread is caught on a rough edge of the spool of upper thread. - Upper thread is caught under the spool of thread. - The thread dust or lint is gathered under the bobbin's tension spring. ■ The frame came out from the carriage Make sure that the positioning pins are placed into the frame's positioning slot and hole. (Refer to page 49.) To insure proper registration of pattern for embroidery, turning off the machine and turning it back on will allow the embroidery arm to reset it's registration points. ■ Cancel the current design and start again Select the "Home" key on the upper right of the screen. The pattern and all information will be deleted. (Refer to page 70.) 1 Primary (top) USB port for media or card Reader/USB card writer module* (USB2.0) * If you have purchased the PE-DESIGN Ver5 or later, PE-DESIGN Lite or PED-BASIC, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns. 2 USB port for mouse (USB1.1) 3 USB port for computer Note ● The processing speed may vary by port selection and quantity of data. ● Do not insert anything other than USB media into the USB media port. Otherwise, the USB media drive may be damaged. ■ Using USB media or embroidery card Reader/ USB card writer module* When sending or reading patterns using the USB media or the embroidery card Reader/USB card writer module*, connect the device to the primary (top) USB port. The primary (top) USB port processes the data faster than the other ports. * If you have purchased the PE-DESIGN Ver5 or later, PE-DESIGN Lite or PED-BASIC, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns. 80