Brother International GT-541 Instruction Manual - English - Page 115
Error, Message, Meaning, Solution, The Yellow Ink Cartridge ran out - error 2095
View all Brother International GT-541 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
7. Troubleshooting Error code Message 2022 EMPTY Cyan 2023 EMPTY Yellow Meaning Solution The Cyan Ink Cartridge ran out of ink. Replace to a new Cyan Cartridge. The Yellow Ink Cartridge ran out of ink. Replace to a new Yellow Cartridge. 2030 WASTE INK FULL The Waste Ink Cartridge is full. Replace to a new Waste Ink Cartridge. 2040 2050 2051 2062 2070 2080 2090 WPC Removed The Wiper Cleaner Cassette is not installed. Install the Wiper Cleaner Cassette. Temp Low: xxx °F The ambient temperature is under the operative temperature rage. "xxx" shows the current temperature. Raise the room temperature. Temp High: xxx °F The ambient temperature is over operative temperature rage. "xxx" is the current temperature. Drop the room temperature. (1) Platen didn't return to the home position because Platen Motor - stepped out. Or (2) Platen Org ** Sensor did not work while Platen returned correctly. OBSTACLE SENSED Push OK, Unload GT-541 detected an obstacle on the Platen (or the media) when printing is started. Remove the obstacle, flat the platen surface and then press OK Button. Sys Wrt Fault Defect in FLASH ROM Check Sum on the SH side. When updating the firmware, no ** backup was made because of the defect of the current firmware. Not Initiated No individual information (the serial number etc.) is recorded in ** GT-541. 2091 Fail: Head Temp 2092 Fail: Head Temp K 2093 Fail: Head Temp M 2094 Fail: Head Temp C The Print Head temperature is raised too high while printing. Wait until the head(s) cool down. Or contact Brother Customer Service Hot Line. 2095 Fail: Head Temp Y 2100 Card Not Ready Push OK Button 2101 Not Enough Area 2102 Card Access Error Push OK Button to escape menu and The Compact Flash is not inserted. re-enter Compact Flash. Or see " 7-1. Solving Printer Problems". Check the free space of the Compact Flash The Compact Flash does not have with PC. enough area for storing logs. Insert a Compact Flash with free area available. Failure in file reading / writing Push OK Button to escape menu and re-enter Compact Flash. Or see " 7-1. Solving Printer Problems". GT-541 105