Brother International HL-1440 Users Manual - English - Page 100
Turn the drum unit gear by hand while looking at the surface of, exact position of the image defect.
UPC - 689466270150
View all Brother International HL-1440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
CHAPTER 6 TROUBLESHOOTING Image Defect Samples Recommendation If the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the OPC drum surface. 94 mm 3.7 in. 94 mm 3.7 in. Clean the drum unit as follows: 1. Position the print sample in front of the drum unit, and find the exact position of the image defect. White Spots Printed pages have white spots in black text and graphics at intervals of 94 mm (3.7 in.). 94 mm 3.7 in. 94 mm 3.7 in. 2. Turn the drum unit gear by hand while looking at the surface of the OPC drum. Black Spots Printed pages have black spots at intervals of 94 mm (3.7 in.). 3. When you have located the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off. 6-14