Brother International HL-1440 Users Manual - English - Page 99
Image Defect Samples, Recommendation, What Kind of, Paper can I Use?, Replacing the Drum Unit
UPC - 689466270150
View all Brother International HL-1440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
CHAPTER 6 TROUBLESHOOTING Image Defect Samples ABCDEFGH abcdefghijk ABCD abcde 01234 Recommendation • Make sure that you use paper that meets the specifications. A rough surfaced paper may cause the problem. See "What Kind of Paper can I Use?" in Chapter 1. • The drum unit may be damaged. Install a new drum unit. See "Replacing the Drum Unit" in Chapter 5. Toner specks • Make sure that you use paper that meets the specifications. See "What Kind of Paper can I Use?" in Chapter 1. • Select the 'Thick paper mode' in the printer driver, or use thinner paper than you are currently using. • Check the printer's environment because conditions such as high humidity may cause this situation to occur. Hollow print • Clean the primary corona wire of the drum unit. See "Cleaning" in Chapter 5. • The drum unit may be damaged. Install a new drum unit. See "Replacing the Drum Unit" in Chapter 5. All black 6-13