Home » Brother International Manuals » Printers » Brother International HL-2270DW » Manual Viewer

Brother International HL-2270DW Network Users Manual - English - Page 16

Confirm your wireless network setup method

UPC - 012502626749

View all Brother International HL-2270DW manuals

Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Configuring your machine for a wireless network (For HL-2270DW) Confirm your wireless network setup method 3 There are three methods to configure your wireless network machine. Use the Brother installer application on the CD-ROM (recommended), the one-push wireless setting mode or the PIN Method of Wi-Fi Protected Setup. The setup process will be different depending on your network environment. Configuration using the Brother installer application on the CD-ROM to 3 configure your machine for a wireless network 3 We recommend that you use the Brother installer application on the CD-ROM we have provided with the machine. By using this application, you can easily connect your machine to your wireless network and install the network software and printer driver which you need to complete the configuration of your machine for a wireless network. You will be guided by the on-screen instructions until you are able to use your Brother wireless network machine. You must know your wireless network settings before you proceed with this installation. Configuration using the Automatic Wireless mode (Recommended) 3 If your WLAN access point/router (A) supports either Wi-Fi Protected Setup (PBC 1) or AOSS™, you can configure the machine easily without knowing your wireless network settings using the Brother installer application. A 1 Push Button Configuration Configuration temporarily using a USB or network cable 3 You can temporarily use a USB cable or network cable to configure your Brother machine using this method. 12

Section	Page
NETWORK USER’S GUIDE	1
Table of Contents	3
1 Introduction	5
Network features	5
Other Network features	6
Security	6
2 Changing your machine’s network settings	7
How to change your machine’s network settings (IP address, Subnet mask and Gateway)	7
Using the BRAdmin Light utility	7
Installing BRAdmin Light	7
Setting the IP address, Subnet Mask and Gateway using BRAdmin Light	7
Other Management Utilities	10
Web Based Management (web browser)	10
BRAdmin Professional 3 utility (Windows®)	10
Web BRAdmin (Windows®)	10
BRPrint Auditor (Windows®)	11
3 Configuring your machine for a wireless network (For HL-2270DW)	12
Overview	12
Step by step chart for wireless network configuration	13
For Infrastructure mode	13
For Ad-hoc mode	14
Confirm your network environment	15
Connected to a computer with a WLAN access point/router in the network (Infrastructure mode)	15
Connected to a wireless capable computer without a WLAN access point/router in the network (Ad-hoc mode)	15
Confirm your wireless network setup method	16
Configuration using the Brother installer application on the CD-ROM to configure your machine for a wireless network	16
Configuration using the Automatic Wireless mode (Recommended)	16
Configuration temporarily using a USB or network cable	16
Configuration using the one-push wireless setting mode to configure your machine for a wireless network (Infrastructure mode only)	17
Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network (Infrastructure mode only)	18
Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)	19
Using the Brother installer application on the CD-ROM to configure your machine for a wireless network	19
Using the one-push wireless setting mode to configure your machine for a wireless network	19
How to configure your wireless machine, using the one-push wireless setting mode	20
Using the PIN Method of Wi-Fi Protected Setup	22
How to configure your wireless machine, using the PIN Method of Wi-Fi Protected Setup	22
4 Wireless configuration using the Brother installer application (For HL-2270DW)	25
Before configuring the wireless settings	25
Configure the wireless settings	26
5 Control panel setup	29
Overview	29
Reset the network settings to the factory default	30
Printing the Printer Settings Page	31
Enabling or disabling the wireless network (For HL-2270DW)	32
Printing the WLAN report (For HL-2270DW)	33
6 Web Based Management	34
Overview	34
How to configure the machine settings using Web Based Management (web browser)	35
7 Security features	36
Overview	36
Sending an E-mail securely	37
Configuration using Web Based Management (web browser)	37
Sending an E-mail with user authentication	37
Secure Management using BRAdmin Professional 3 (Windows®)	39
To use the BRAdmin Professional 3 utility securely, you need to follow the points below	39
8 Troubleshooting	40
Overview	40
Identifying your problem	40
Go to the page for your solution from the lists below	40
Appendix A	46
Supported protocols and security features	46

Match case Limit results 1 per page

Configuring your machine for a wireless network (For HL-2270DW)

Confirm your wireless network setup method

There are three methods to configure your wireless network machine. Use the Brother installer application

on the CD-ROM (recommended), the one-push wireless setting mode or the PIN Method of

Wi-Fi Protected Setup. The setup process will be different depending on your network environment.

Configuration using the Brother installer application on the CD-ROM to

configure your machine for a wireless network

We recommend that you use the Brother installer application on the CD-ROM we have provided with the

machine. By using this application, you can easily connect your machine to your wireless network and install

the network software and printer driver which you need to complete the configuration of your machine for a

wireless network. You will be guided by the on-screen instructions until you are able to use your Brother

wireless network machine.

You must know your wireless network settings before you proceed with this

installation.

Configuration using the Automatic Wireless mode (Recommended)

If your WLAN access point/router (A) supports either Wi-Fi Protected Setup (PBC

) or AOSS™, you can

configure the machine easily without knowing your wireless network settings using the Brother installer

application.

Push Button Configuration

Configuration temporarily using a USB or network cable

You can temporarily use a USB cable or network cable to configure your Brother machine using this method.