Brother International HL-2270DW Network Users Manual - English - Page 30
Reset the network settings to the factory default - default password
UPC - 012502626749
View all Brother International HL-2270DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Control panel setup Reset the network settings to the factory default 5 You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information). Note • This function resets all wired and wireless network settings to the factory default. • You can also reset the print server back to its factory default settings using the BRAdmin applications or Web Based Management (web browser). (For more information, see Other Management Utilities on page 6.) a Turn off the machine. 5 b Make sure that the front cover is closed and the power cord is plugged in. c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up, and then the Ready LED turns off. d Release Go. Make sure that all the LEDs turn off. e Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The machine will restart. 26