Brother International HL-2270DW Quick Setup Guide - English - Page 2
Remove the packing material from the machine, CAUTION
UPC - 012502626749
View all Brother International HL-2270DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Remove the packing material from the machine IMPORTANT DO NOT connect the AC power cord yet. a Remove the packing tape from the outside of the machine and the silica gel pack from the face-down output tray. CCAAUUTTIOINON DO NOT eat the Silica Pack. Discard immediately. b Open the front cover. e Take out the drum unit and toner cartridge assembly. f Gently shake it from side to side several times to distribute the toner evenly inside the assembly. c Lift the elastic band off the drum. g Put the drum unit and toner cartridge assembly back in the machine. d Pull the paper strip to remove the protective material as shown in the illustration. h Close the front cover of the machine. 2
2
2
Remove the packing
material from the
machine
a
Remove the packing tape from the outside of
the machine and the silica gel pack from the
face-down output tray.
CAUTION
DO NOT eat the Silica Pack. Discard immediately.
b
Open the front cover.
c
Lift the elastic band off the drum.
d
Pull the paper strip to remove the protective
material as shown in the illustration.
e
Take out the drum unit and toner cartridge
assembly.
f
Gently shake it from side to side several times
to distribute the toner evenly inside the
assembly.
g
Put the drum unit and toner cartridge assembly
back in the machine.
h
Close the front cover of the machine.
IMPORTANT
DO NOT connect the AC power cord yet.