Brother International HL-2270DW Quick Setup Guide - English - Page 23
Wireless Network, Macintosh, m - wireless setup mac
UPC - 012502626749
View all Brother International HL-2270DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Wireless Network Macintosh j The machine LED's will indicate the connection results. See LED indications when using the one-push wireless setting mode on page 33. A WLAN report will automatically be printed. If the connection failed, check the error on the printed report and refer to Troubleshooting on page 28 k Click Next. m Follow the on-screen instructions to complete setup. Note When the Brother Support screen appears, make your selection and follow the on-screen instructions. Finish The installation is now complete. l Check the box after you confirm that you have completed the wireless settings, and then click Next. Note If you use a specified IP Address for the machine, you must set the Boot Method to Static by using the BRAdmin Light. For more information, See Changing your machine's network settings in the Network User's Guide. Install the printer driver IMPORTANT DO NOT try to cancel any of the screens during this installation. Note • If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name. You can also confirm your IP Address by scrolling to the right. • You can find your machine's MAC Address (Ethernet Address) and the IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 31. Windows® Macintosh Wireless Network 23