Brother International HL-3170CDW Users Manual - English - Page 61

Driver and Software  Toner Save Mode Conserve toner use with this feature. When you set Toner Save Mode to On, print appears lighter. The default setting is Off. NOTE We do not recommend Toner Save Mode for printing Photo or grayscale images. 2  Sleep Time [Min.] When the machine does not receive data for a certain period of time, it enters Sleep mode. In Sleep mode, the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be reset to the specific time set at the factory; this can be altered in the driver. Intelligent Sleep mode adjusts to the most appropriate timeout setting depending on the frequency of your machine use. While the machine is in Sleep mode, the LCD shows Sleep, but the machine can still receive data. Receiving a print job will wake up the machine to start printing.  Color / Mono Choose the color mode: • Auto The machine checks the content of your documents for color. If color is detected, it prints in color. If no color content is detected, it prints in monochrome. The total print speed may become slower. • Color The device will print all pages in full color mode. • Mono Selecting Mono mode prints your documents in grayscale. NOTE • Sometimes a document can contain color information even if it appears to be monochrome (for example, gray areas can actually be made from a combination of colors). • If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a color document, the print job cannot be completed. You can choose to start the print job again in Mono mode, as long as black toner is available.  Color Mode The following options are available in Color Matching mode: • Normal This is the Default color mode. • Vivid The color of all elements are adjusted to become a more vivid color. • None  Improve Gray Color You can improve the image of a shaded area. 55