Brother International HL-3170CDW Users Manual - English - Page 94
General Setup, Submenu, Menu Selections, Options, Descriptions - network setup
View all Brother International HL-3170CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
General Information General Setup Submenu Local Language Ecology Panel Control Setting Lock Reprint Interface Menu Selections Sleep Time Toner Save Auto Power Off Button Repeat Message Scroll LCD Contrast Auto Online Select Auto IF Time Input Buffer 3 Options Descriptions English* / Français... Changes the LCD language for your country. 0 / 1 / 2 / 3* / 4 / 5 / ... Min Sets the time to return to Power Save mode. On / Off* Increases the page yield of the toner 3 cartridge. Off* / 1 hour / 2 hours / 4 hours / 8 hours Sets the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. Choose Off if you do not want the machine to go into Power Off mode. 0.1* / 0.4 / 0.6 / 0.8 / 1.0 / 1.4 / 1.8 / 2.0 Sec Sets the time for the LCD message to change when holding a or b at intervals. level1* / level2 / ... / Level10 Sets the time in seconds that an LCD message will scroll across the LCD. From Level 1=0.2 sec to Level 10=2.0 sec. -nnonn+ Adjusts the contrast of the LCD. On* / Off On / Off* On / Off* Auto* / USB / Network Sets the machine to return to Ready mode after it has been idle for 30 seconds. If you choose Off, the machine cannot receive print jobs if it has been left in Menu mode. Turns the lock panel settings On or Off using the password. Turns the reprint settings On or Off. Chooses the interface to use. If you choose Auto, the machine automatically changes the interface to USB or Ethernet depending on which interface is receiving data. 1 / 2 / 3 / 4 / 5* / ... / 99Sec You must set the time-out period for the auto interface selection. Level 1 / 2 / 3 / 4* / ... / 7 Increases or decreases the input buffer capacity. The factory settings are shown in Bold with an asterisk. 88