Brother International HL-3170CDW Users Manual - English - Page 98
Network Menu for HL-3150CDN, Submenu 1, Menu Selections, Options, Descriptions
View all Brother International HL-3170CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
General Information Network Menu for HL-3150CDN 3 Submenu 1 Submenu 2 Menu Selections Options Descriptions TCP/IP Boot Method IP Address - Subnet Mask - Gateway - IP Boot Tries - APIPA - Auto* / Static / RARP / BOOTP / DHCP Chooses the IP method that best suits your needs. Enter the IP address. (000.000.000.000)* 1 Enter the Subnet mask. 3 (000.000.000.000)* 1 000.000.000.000)* 1 Enter the Gateway address. 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. On* / Off Automatically allocates the IP address from the link-local address range. 1 IPv6 - On / Off* Sets use of IPv6 protocol. Ethernet - - Auto* / 100B-FD / 100B-HD / 10B-FD / Chooses Ethernet link mode. 10B-HD Wired Status - - Active 100B-FD / Active 100B-HD / Active 10B-FD / Active 10B-HD / Inactive / Wired OFF Shows Ethernet link status. MAC Address - - - Shows MAC address of the machine. Network Reset Restores all network settings of the internal print server to the factory default. The factory settings are shown in Bold with an asterisk. 1 ### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP address from the machine's control panel. 92