Brother International HL-4570CDW Users Manual - English - Page 72
LCD, Back light, LCD messages - cartridge
UPC - 012502625001
View all Brother International HL-4570CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Control Panel LCD 3 The LCD shows the current machine status. When you use the buttons on the control panel, the LCD will change. If there are any problems, the LCD will show the error message, maintenance message, or call service message so you will know that you need to take action. (For more information about these messages, see LCD messages on page 140.) 3 Back light 3 Light Off Green (General, Error, Setting) Meaning The machine is off or in sleep status. Ready to print Printing Warming up There is a problem with the machine. Choosing a menu, (Control panel menu, Reprint menu, or Direct Print menu) Canceling the job Pause LCD messages 3 The message on the LCD shows the current machine status during normal operation. Ready Ko Yo Mn Co The o and n marks indicate the status of each toner cartridge, Black (K), Yellow (Y), Magenta (M) and Cyan (C) (where the n means blinking). When a mark blinks (n), the indicated toner cartridge is near the end of its life. When the replacement of a toner cartridge becomes necessary, corresponding o mark disappears. The mark indicates the wireless signal strength with four levels. ( means no signal, means weak, means middle, and means strong.) (HL-4570CDW(T) only) When an error has occurred, the type of error is displayed on the first line of the LCD message at first as shown below. The message on the second line shows information for clearing the error. Cover is Open Close the Front 66