Brother International HL-4570CDW Users Manual - English - Page 92
Installing extra memory, Unpack the SO-DIMM and hold it by its edges.
UPC - 012502625001
View all Brother International HL-4570CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Option Installing extra memory 4 Note Always turn off the machine power switch before installing or removing the SO-DIMM. a Turn off the machine power switch, and then unplug the machine. Disconnect all interface cables from the machine. b Remove the plastic (1) and then the metal (2) SO-DIMM covers. 4 2 1 c Unpack the SO-DIMM and hold it by its edges. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface. d Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2). 1 2 86
Option
86
4
Installing extra memory
4
Note
Always turn off the machine power switch before installing or removing the SO-DIMM.
a
Turn off the machine power switch, and then unplug the machine. Disconnect all interface cables from
the machine.
b
Remove the plastic (1) and then the metal (2) SO-DIMM covers.
c
Unpack the SO-DIMM and hold it by its edges.
IMPORTANT
To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board
surface.
d
Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot.
Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).
2
1
1
2