Brother International IntelliFax-1270 Users Manual - English - Page 27
Do not connect a TAD elsewhere on the same phone line - your - service manual
View all Brother International IntelliFax-1270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
17 A S S E M B L Y A N D C O N N E C T I O N S Do not connect a TAD elsewhere on the same phone line - your fax machine and TAD will both try to control the line. You may connect an external TAD to a separate wall jack only if you subscribe to your telephone company's Distinctive Ring Service, have registered the distinctive ring pattern on your fax machine, use that number as a fax number and set your machine's Answer mode to MANUAL. Connections The external TAD must be plugged into the left side of the fax machine, into the jack labeled EXT. Your fax machine cannot work properly if you plug the TAD into a wall jack. 1 Plug the telephone line cord from the wall jack into the left side of the fax machine, in the jack labeled LINE. 2 Plug the telephone line cord from your TAD into the left side of the fax machine, in the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD's telephone line jack, and not its telephone set jack.) 3 Set the Answer Mode to TAD. 4 Set your external TAD to 4 rings or less. (The fax machine's Ring Delay setting does not apply). 5 Set the TAD to answer calls. 6 Record the outgoing message (see below).