Brother International IntelliFax-4100e Users Manual - English - Page 104

WARNING, Reconnect the interface cable, and then plug the power cord into the AC outlet.

Page 104 highlights

5 To install the memory board onto the main controller board, plug the attached spacer into the connectors of the main controller board. WARNING I Hold the memory board by its edges. Do not touch the surface of the board. I Make sure the memory board is securely seated on the main controller board. 6 Reconnect the connector to the backup battery. 7 Reinstall the access plate and the rear cover. 8 Reconnect the interface cable, and then plug the power cord into the AC outlet. O P T I O N A L A C C E S S O R I E S 12 - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155

OPTIONAL ACCESSORIES
12 - 3
5
To install the memory board onto the main controller board, plug the attached
spacer into the connectors of the main controller board.
WARNING
Hold the memory board by its edges. Do not touch the surface of the board.
Make sure the memory board is securely seated on the main controller board.
6
Reconnect the connector to the backup battery.
7
Reinstall the access plate and the rear cover.
8
Reconnect the interface cable, and then plug the power cord into the AC outlet.