Brother International IntelliFax-4100e Users Manual - English - Page 90

Remote Commands Follow the commands below to access features remotely. When you call your machine and enter your Remote Retrieval Access Code (1 5 9 ), the system will signal you with two short beeps to enter a remote command. Remote Commands 95 Changing Fax Forwarding /Paging setting 1 OFF 2 Fax Forwarding 3 Paging 4 FAX FWD No. 6 Fax Storage ON 7 Fax Storage OFF 96 Retrieve a fax 2 Retrieve all faxes 3 Erase fax from the memory 97 Check the Receiving Status 1 Fax 98 Change Receive Mode 1 TAD 2 FAX/TEL 3 FAX 90 Exit Operation Details If you hear one long beep, the change is accepted. If you hear three short beeps, you cannot change it because the conditions have not been met. (Example: registering paging number). You can register your fax forwarding number by using 4. FAX FWD NO (See Page 9-6). Once you have registered the number, your machine will change automatically to FAX FWD:ON mode. You can set FAX STORAGE to ON or OFF. Enter the number of a remote fax machine to receive stored fax message(s). (See Page 9-6.) If you hear one long beep, you can erase fax message(s) from the memory. You can check whether your machine has received any fax message(s). If yes, you will hear one long beep. If no, you will hear three short beeps. If you hear one long beep, you can change the Answer Mode. If you hear three short beeps, you cannot change it. After a long beep, you can exit remote retrieval. REMOTE FAX OPTIONS 9-5