Brother International IntelliFax-885MC Users Manual - English - Page 40

WARNING It is important that you do not choose PERMANENT unless all users are hearing-impaired. Otherwise, the default setting of AMPLIFY may damage the hearing of some users. Setting Volume Amplify Please carefully read Setting the Handset Volume before you do the following steps: 1 Press Menu/Set, 1, 4. 4.VOLUME AMPLIFY 2 Press or to select VOL AMPLIFY:OFF? if VOL AMPLIFY:OFF? none of the users are hearing-impaired and go to Step 4-OR-If some or all of the users are hearingimpaired, select VOL AMPLIFY:ON? and then press Menu/Set. 3 Press or to select PERMANENT? if all the users PERMANENT? are hearing-impaired-OR-Select TEMPORARY? if only some of the users are hearing-impaired. 4 Press Menu/Set. 5 Press Stop/Exit. Setting the Ring Volume You can adjust the ring volume when your fax machine is idle. You can select a ring volume level or press until the ring is off. Press or to adjust the volume level. With each key press, the fax machine rings so you can hear the current setting and the LCD shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again. Setting Beeper Volume You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the beeper is set to LOW or HIGH, the fax machine beeps every time you press a key or make an error, and at the end of fax sending or receiving. 1 Press Menu/Set, 1, 3. 3.BEEPER 2 Press or to select your setting, and then press Menu/Set. 3 Press Stop/Exit. 4-5 INITIAL SETUP