Brother International IntelliFax-885MC Users Manual - English - Page 51

Quick Scan Fax Transmission You can scan a fax into the fax machine's memory to be sent as soon as the scan is complete. This way, you don't have to wait for the entire fax to be transmitted before you retrieve your original. If you get an OUT OF MEMORY message while scanning the first page of a fax, press Stop/Exit to cancel the scan. If you get an OUT OF MEMORY message while scanning in a subsequent page, you'll have the option to press Fax Start to transmit the pages scanned so far, or to press Stop/Exit to cancel the Quick Scan operation. 1 Place the original face down in the ADF. 2 Press Quick-Scan. The LCD indicates how much memory is available. 3 Enter the fax number. 4 Press Fax Start to begin scanning the document into memory. Once the scan is complete, the fax machine dials the call. Basic Sending Operations Contrast If your original is very light or very dark, you might want to set the contrast accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very dark original. 1 Place the original face down in the ADF. 2 Press Menu/Set, 3, 3. 3.CONTRAST 3 Press or to select AUTO, S.LIGHT or S.DARK, and then press Menu/Set. 4 Press 2 if you are finished choosing settings, and go to Step 5-OR-Press 1 if you want to select additional settings. The display returns to the Setup Send menu. 5 Enter a fax number, and then press Fax Start to send a fax-OR-Press Copy to make a copy. Resolution When you have an original in the ADF, you can use the Resolution key. Press Resolution continuously until you see your selection on the LCD. STANDARD-suitable for most typed originals. FINE-good for small print; transmits a little slower than standard resolution. S. FINE-good for small print or artwork; transmits slower than fine resolution. PHOTO-use when original has varying shades of gray; slowest transmission time. SETUP SEND 6-3