Brother International LS-2125i Users Manual - English - Page 29
Starting to sew - stitches
UPC - 012502615293
View all Brother International LS-2125i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Starting to sew Turn on the sewing machine. a While holding the end of the thread and the e fabric with your left hand, turn the handwheel toward you (counterclockwise) with your right hand to lower the needle to the starting point of the stitching. 2 Raise the needle to its highest position by b turning the handwheel toward you (counterclockwise). Lower the presser foot lever. f Raise the presser foot lever. c a Presser foot lever Slowly press down on the foot controller. g a Presser foot lever Place the fabric under the presser foot, pass d the thread under the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine. a 5 cm (2 inches) X The machine starts sewing. Take your foot off the foot controller. h X The machine stops sewing. Raise the needle to its highest position by i turning the handwheel toward you (counterclockwise). Raise the presser foot lever. j 27