Brother International LS-2125i Users Manual - English - Page 41
Pull the upper thread at the end of - bobbins
UPC - 012502615293
View all Brother International LS-2125i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Turn the handwheel toward you e (counterclockwise) to check that the needle correctly goes into the two holes of the button. If the needle hits the button, return to step a. CAUTION ● When sewing, be sure that the needle does 3 not touch the button, otherwise the needle may bend or break. Start sewing. f • After sewing for about 10 seconds at a low speed, press and hold down the reverse sewing lever to sew a few reinforcement stitches. Pull the fabric to the left side of the machine, g and then cut the upper and lower threads, leaving a length of 15 cm (6 inches). Pull the upper thread at the end of the h stitching to the wrong side of the fabric, and then tie it with the bobbin thread. Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching. 39