Brother International LX2500 Users Manual - English and Spanish - Page 30
Sewing buttons - button hole
View all Brother International LX2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
SEWING BUTTONHOLES AND BUTTONS Sewing buttons Stitch Name Pattern Zigzag 8 Stitch Zigzag 9 Stitch Zigzag 10 Stitch Stitch Length [mm (inch)] 0.7 (1/32) 1.5 (1/16) 2 (1/16) Stitch Width [mm (inch)] 1.5 (1/16) 3 (1/8) 5 (3/16) Foot Other Button Sewing Darning Foot Plate "M" Button Sewing Darning Foot Plate "M" Button Sewing Darning Foot Plate "M" Measure the distance between the 1 buttonholes and set the pattern selection dial to the Zigzag Stitch with the desired width. Turn off the machine. 2 Change the foot to the button sewing foot 3 "M". Place the darning plate on the needle 4 plate. Put a button between the foot and the 6 fabric and make sure that the needle enters the holes without hitting the button. If it hits, see step 1. At a slow speed, sew about 10 stitches. 7 CAUTION ● Make sure the needle does not hit the button during sewing. The needle may break and you may be injured. Pull the upper thread at the end of the 8 stitching to the wrong side of the fabric, and then tie it with the bobbin thread. X Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching. Turn on the machine. 5 29