Brother International MFC-290C Users Manual - English - Page 117
Error Message, Cause, Action
UPC - 012502620488
View all Brother International MFC-290C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Troubleshooting and Routine Maintenance Error Message Cause Action High Temperature The print head is too warm. Allow the machine to cool down. Hub is Unusable. A Hub or USB Flash memory drive A Hub or USB Flash memory drive with Hub are with Hub has been connected to the not supported. Unplug the device from the USB USB direct interface. direct interface. Init Unable XX The machine has a mechanical problem. -OR- A foreign object such as a clip or ripped paper is in the machine. Open the scanner cover and look on the left, middle and right hand side under the covers for foreign objects and paper scraps. If the error message continues, see Transferring your faxes or Fax Journal report on page 106 before disconnecting the machine so you will not lose any important messages. Then, disconnect the machine from the power for several minutes and then reconnect it. Ink Low Black Ink Low Yellow Ink Low Cyan Ink Low Magenta One or more ink cartridges are running out of ink. If a sending machine has a color fax, your machine's 'handshake' will ask that the fax is sent as black & white. If the sending machine has the ability to convert it, the color fax will be printed at your machine as a black & white fax. Order a new ink cartridge. You can continue printing until the LCD shows Cannot Print. (See Ordering accessories and supplies on page ii and Replacing the ink cartridges on page 110.) Low Temperature The print head is too cold. Allow the machine to warm up. Media Error The memory card is either corrupted, improperly formatted, or there is a problem with the memory card. Put the card firmly into the slot again to make sure it is in the correct position. If the error remains, check the media drive (slot) of the machine by putting in another memory card that you know is working. Media is Full. The memory card or USB flash memory drive you are using already contains 999 files. Your machine can only save to your memory card or USB flash memory drive if it contains less than 999 files. Try deleting unused files to free some space and try again. No Caller ID There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company. If you want to use the Caller ID feature call your telephone company. (See Caller ID on page 43.) No Cartridge An ink cartridge is not installed properly. Take out the new ink cartridge and re-install it slowly until it clicks. (See Replacing the ink cartridges on page 110.) No File The memory card or USB Flash Put the correct memory card or USB Flash memory drive in the media drive memory drive into the slot again. does not contain a .JPG file. B 103