Brother International MFC-290C Users Manual - English - Page 44
Dual access (Black & White only), Real time transmission, Sending in real time for all faxes
UPC - 012502620488
View all Brother International MFC-290C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 5 Dual access (Black & White only) 5 You can dial a number and start scanning the fax into memory-even when the machine is sending from memory, receiving faxes or printing PC data. The LCD shows the new job number and available memory. The number of pages you can scan into the memory will vary depending on the data that is printed on them. Note If the Out of Memory message appears while scanning a document, press Stop/Exit to cancel or Black Start to send the scanned pages. Real time transmission 5 When you are sending a fax, the machine will scan the document into the memory before sending. Then, as soon as the telephone line is free, the machine will start dialing and sending. If the memory is full or you are sending a color fax, the machine will send the document in real time (even if Real Time TX is set to Off). Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can set Real Time TX to On for all documents or Next Fax Only for the next fax only. Note In Real Time Transmission, the automatic redial feature does not work when using the scanner glass. Sending in real time for all faxes 5 a Make sure you are in Fax mode . b Press Menu, 2, 2, 3. 3.Real Time TX Realtime TX:On c Press a or b to choose Realtime TX:On or Realtime TX:Off. Press OK. Sending in real time for the next fax only 5 a Make sure you are in Fax mode . b Press Menu, 2, 2, 3. c Press a or b to choose Next Fax Only. Press OK. d Press a or b to choose Off or On. e Press OK. Note In real time transmission, the automatic redial feature does not work when using the scanner glass. 30