Home » Brother International Manuals » Multifunction Devices » Brother International MFC-7360N » Manual Viewer

Brother International MFC-7360N Users Manual - English - Page 80

B Troubleshooting, Error and maintenance messages

UPC - 012502627005

View all Brother International MFC-7360N manuals

Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

B Troubleshooting B Error and maintenance messages B As with any sophisticated office product, errors may occur and consumable items may need to be replaced. If this happens, your machine identifies the error or required routine maintenance and shows the appropriate message. The most common error and maintenance messages are shown below. You can correct most errors and perform routine maintenance by yourself. If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips: Visit us at http://solutions.brother.com/. Error Message Access Denied Cartridge Error Comm.Error Connection Fail Cooling Down Wait for a while Cause Action The function you want to use is restricted by Secure Function Lock. Contact your administrator to check your Secure Function Lock Settings. The toner cartridge is not installed Pull out the drum unit and remove the toner properly. cartridge, then re-install the toner cartridge in the drum unit. Poor telephone line quality caused a communication error. Send the fax again or connect the machine to another telephone line. If the problem continues, call the telephone company and ask them to check your telephone line. You tried to poll a fax machine Check the other fax machine's polling setup. that is not in Polled Waiting mode. The temperature of the drum unit or toner cartridge is too hot. The machine will pause its current print job and go into cooling down mode. During the cooling down mode, you will hear the cooling fan running while the LCD shows Cooling Down, and Wait for a while. Make sure that you can hear the fan in the machine spinning and that the exhaust outlet is not blocked by something. If the fan is spinning, remove any obstacles that surround the exhaust outlet, and then leave the machine turned on but do not use it for several minutes. If the fan is not spinning do one of the following: (For MFC-7360N and MFC-7460DN ) See Transferring your faxes or Fax Journal report on page 69 before disconnecting the machine so you will not lose any important messages. Then, disconnect the machine from the power for several minutes and then reconnect it. (For MFC-7860DW) Disconnect the machine from the AC power outlet for several minutes, then reconnect it. 64

Section	Page
BASIC USER’S GUIDE MFC-7360N/MFC-7460DN/MFC-7860DW	1
Brother numbers	3
Register your product	3
FAQs (frequently asked questions)	3
For Customer Service	3
Ordering accessories and supplies	4
Compilation and Publication Notice	5
User’s Guides and where do I find it?	10
Table of Contents	11
1 General information	17
Using the documentation	17
Symbols and conventions used in the documentation	17
Accessing the Advanced User's Guide, Software User's Guide and Network User's Guide	18
Viewing Documentation	18
How to find Scanning instructions	19
Accessing Brother Support (Windows®)	20
Accessing Brother Support (Macintosh)	21
Control panel overview	22
2 Loading paper	25
Loading paper and print media	25
Loading paper in the standard paper tray	25
Printing on plain paper, thin paper or recycled paper from the standard paper tray	25
Loading paper in the manual feed slot	27
Printing on plain paper, thin paper or recycled paper from the manual feed slot	27
Printing on thick paper, bond paper, labels and envelopes	29
Unscannable and unprintable areas	32
Paper settings	33
Paper Type	33
Paper Size	33
Acceptable paper and other print media	33
Recommended paper and print media	33
Type and size of paper	34
The name for the paper trays in the printer driver in this Guide are as follows:	34
Paper capacity of the paper trays	34
Recommended paper specifications	34
Handling and using special paper	35
Types of paper to avoid	35
Envelopes	36
Types of envelopes to avoid	36
Labels	37
Types of labels to avoid	37
3 Loading documents	38
How to load documents	38
Using the automatic document feeder (ADF)	38
Document Sizes Supported	38
How to load documents	38
Using the scanner glass	39
Document Sizes Supported	39
How to load documents	39
4 Sending a fax	41
How to send a fax	41
Faxing A4 size documents from the scanner glass	42
Canceling a fax in progress	42
Transmission verification report	42
5 Receiving a fax	43
Receive modes	43
Choose the correct Receive Mode	43
Using receive modes	45
Fax Only	45
Fax/Tel	45
Manual	45
External TAD	45
Receive Mode settings	46
Ring Delay	46
F/T Ring Time (Fax/Tel mode only)	46
Easy Receive	47
If Easy Receive is On:	47
If Easy Receive is Off:	47
6 Telephone services and external devices	48
Telephone line services	48
Voice Mail	48
Distinctive Ring	48
What does your telephone company’s ‘Distinctive Ring’ do?	49
What does Brother’s ‘Distinctive Ring’ do?	49
Do you have Voice Mail?	49
Before you choose the ring pattern to register	49
Registering the Distinctive Ring pattern Very important!	50
Turning off Distinctive Ring	50
Connecting an external TAD (telephone answering device)	51
Connections	51
Recording an outgoing message (OGM)	52
Multi-line connections (PBX)	52
External and extension telephones	52
Connecting an external or extension telephone	52
Using external and extension telephones	53
Using extension telephones	53
Using an external telephone (Connected to the EXT. jack of the machine)	53
If you answer a call and no one is on the line:	53
Using a non-Brother cordless external handset	53
Using Remote Codes	54
Fax Receive Code	54
Telephone Answer Code	54
Changing the Remote Codes	54
7 Dialing and storing numbers	55
How to dial	55
Manual dialing	55
One touch dialing	55
Speed Dialing	55
Search	56
Fax redial	56
Storing numbers	56
One Touch and Speed Dial Options	57
Storing a pause	58
Storing One Touch Dial numbers	58
Storing Speed Dial numbers	60
Changing One Touch and Speed Dial numbers	62
Deleting One Touch and Speed Dial numbers	63
8 Making copies	64
How to copy	64
Stop copying	64
Copy settings	64
9 How to print from a computer	65
Printing a document	65
10 How to scan to a computer	66
Scanning a document	66
Scanning using the scan key	66
Scanning using a scanner driver	67
A Routine maintenance	68
Replacing the consumable items	68
Replacing the toner cartridge	69
Toner Low	69
Replace Toner	69
Toner Ended	69
Replacing the toner cartridge	69
Cleaning the corona wire	74
Replacing the drum unit	75
Drum Error	76
Replace Drum	76
Drum Stop	76
Replacing the drum unit	76
Resetting the drum counter	79
B Troubleshooting	80
Error and maintenance messages	80
Transferring your faxes or Fax Journal report	85
Transferring faxes to another fax machine	85
Transferring faxes to your PC	85
Transferring Fax Journal report to another fax machine	85
Document Jams	86
Document is jammed in the top of the ADF unit	86
Document is jammed under the document cover	86
Removing small documents jammed in the ADF	87
Document is jammed at the output tray	87
Paper Jams	88
Paper is jammed in the standard paper tray	88
Paper is jammed at the back of the machine	89
Paper is jammed inside the machine	91
Paper is jammed in the Duplex Tray (MFC-7460DN and MFC-7860DW)	96
If you are having difficulty with your machine	98
Setting Dial Tone detection	107
Telephone line interference	107
Improving the print quality	108
Machine Information	118
Checking the Serial Number	118
Reset functions	118
How to reset the machine	119
C Menu and features	120
On-screen programming	120
Menu table	120
How to access the menu mode	120
Menu table	121
Entering text	138
D Specifications	140
General	140
Document Size	142
Print media	143
Fax	144
Copy	145
Scanner	146
Printer	147
Interfaces	148
Computer requirements	149
Consumable items	151
Network (LAN)	152
Index	153

Match case Limit results 1 per page

Error and maintenance messages

As with any sophisticated office product, errors may occur and consumable items may need to be

replaced. If this happens, your machine identifies the error or required routine maintenance and

shows the appropriate message. The most common error and maintenance messages are shown

below.

You can correct most errors and perform routine maintenance by yourself. If you need more help,

the Brother Solutions Center offers the latest FAQs and troubleshooting tips:

Visit us at http://solutions.brother.com/

Troubleshooting

Error Message

Cause

Action

Access Denied

The function you want to use is

restricted by Secure Function

Lock.

Contact your administrator to check your

Secure Function Lock Settings.

Cartridge Error

The toner cartridge is not installed

properly.

Pull out the drum unit and remove the toner

cartridge, then re-install the toner cartridge

in the drum unit.

Comm.Error

Poor telephone line quality

caused a communication error.

Send the fax again or connect the machine

to another telephone line. If the problem

continues, call the telephone company and

ask them to check your telephone line.

Connection Fail

You tried to poll a fax machine

that is not in Polled Waiting mode.

Check the other fax machine’s polling setup.

Cooling Down

Wait for a while

The temperature of the drum unit

or toner cartridge is too hot. The

machine will pause its current

print job and go into cooling down

mode. During the cooling down

mode, you will hear the cooling

fan running while the LCD shows

Cooling Down

, and

Wait for

a while

Make sure that you can hear the fan in the

machine spinning and that the exhaust

outlet is not blocked by something.

If the fan is spinning, remove any obstacles

that surround the exhaust outlet, and then

leave the machine turned on but do not use

it for several minutes.

If the fan is not spinning do one of the

following:

(For MFC-7360N and MFC-7460DN )

See

Transferring your faxes or Fax Journal

report

on page 69 before disconnecting the

machine so you will not lose any important

messages.

Then, disconnect the machine from the

power for several minutes and then

reconnect it.

(For MFC-7860DW)

Disconnect the machine from the AC power

outlet for several minutes, then reconnect it.