Home » Brother International Manuals » Multifunction Devices » Brother International MFC-7360N » Manual Viewer

Brother International MFC-7360N Users Manual - English - Page 82

Manual Feed, Start, Error Message, Cause, Action, Init Unable XX, Jam Duplex, Jam Inside, Jam Rear - toner error

UPC - 012502627005

View all Brother International MFC-7360N manuals

Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Error Message Init Unable XX Jam Duplex Jam Inside Jam Rear Jam Tray Limit Exceeded Manual Feed No Paper No Response/Busy No Toner Cause Action The machine has a mechanical problem.  (For MFC-7360N and MFC-7460DN) Received fax messages still in memory will be lost when the machine is turned off. See Transferring your faxes or Fax Journal report on page 69 before disconnecting the machine so you will not lose any important messages. Then, disconnect the machine from the power for several minutes and then reconnect it. (For MFC-7860DW) Disconnect the machine from the power for several minutes, then reconnect it.  If the problem continues, call Brother Customer Service. The paper is jammed in the duplex tray at the back of the machine. (See Paper is jammed in the Duplex Tray (MFC-7460DN and MFC-7860DW) on page 80.) The paper is jammed inside the (See Paper is jammed inside the machine machine. on page 75.) The paper is jammed in the back (See Paper is jammed at the back of the of the machine. machine on page 73.) The paper is jammed in the paper (See Paper is jammed in the standard paper tray of the machine. tray on page 72.) The Page Limit set in Secure Contact your administrator to check your Function Lock 2.0 for your ID was Secure Function Lock Settings. reached. Manual Feed was selected as Place a sheet of paper in the manual feed the paper source when there was slot. (See Loading paper in the manual feed no paper in the manual feed slot. slot on page 11.) The machine is out of paper or paper is not properly loaded in the paper tray. Do one of the following:  Refill the paper in the paper tray and press Start.  Remove the paper and load it again. Then press Start.  If the problem is not resolved, the paper pick-up roller may need to be cleaned. Clean the paper pick-up roller. (See Cleaning the paper pick-up rollers in Appendix A of the Advanced User's Guide.) The number you dialed does not Verify the number and try again. answer or is busy. The toner cartridge is not installed Pull out the drum unit. Take out the toner correctly. cartridge and then put it back into the drum unit. 66

Section	Page
BASIC USER’S GUIDE MFC-7360N/MFC-7460DN/MFC-7860DW	1
Brother numbers	3
Register your product	3
FAQs (frequently asked questions)	3
For Customer Service	3
Ordering accessories and supplies	4
Compilation and Publication Notice	5
User’s Guides and where do I find it?	10
Table of Contents	11
1 General information	17
Using the documentation	17
Symbols and conventions used in the documentation	17
Accessing the Advanced User's Guide, Software User's Guide and Network User's Guide	18
Viewing Documentation	18
How to find Scanning instructions	19
Accessing Brother Support (Windows®)	20
Accessing Brother Support (Macintosh)	21
Control panel overview	22
2 Loading paper	25
Loading paper and print media	25
Loading paper in the standard paper tray	25
Printing on plain paper, thin paper or recycled paper from the standard paper tray	25
Loading paper in the manual feed slot	27
Printing on plain paper, thin paper or recycled paper from the manual feed slot	27
Printing on thick paper, bond paper, labels and envelopes	29
Unscannable and unprintable areas	32
Paper settings	33
Paper Type	33
Paper Size	33
Acceptable paper and other print media	33
Recommended paper and print media	33
Type and size of paper	34
The name for the paper trays in the printer driver in this Guide are as follows:	34
Paper capacity of the paper trays	34
Recommended paper specifications	34
Handling and using special paper	35
Types of paper to avoid	35
Envelopes	36
Types of envelopes to avoid	36
Labels	37
Types of labels to avoid	37
3 Loading documents	38
How to load documents	38
Using the automatic document feeder (ADF)	38
Document Sizes Supported	38
How to load documents	38
Using the scanner glass	39
Document Sizes Supported	39
How to load documents	39
4 Sending a fax	41
How to send a fax	41
Faxing A4 size documents from the scanner glass	42
Canceling a fax in progress	42
Transmission verification report	42
5 Receiving a fax	43
Receive modes	43
Choose the correct Receive Mode	43
Using receive modes	45
Fax Only	45
Fax/Tel	45
Manual	45
External TAD	45
Receive Mode settings	46
Ring Delay	46
F/T Ring Time (Fax/Tel mode only)	46
Easy Receive	47
If Easy Receive is On:	47
If Easy Receive is Off:	47
6 Telephone services and external devices	48
Telephone line services	48
Voice Mail	48
Distinctive Ring	48
What does your telephone company’s ‘Distinctive Ring’ do?	49
What does Brother’s ‘Distinctive Ring’ do?	49
Do you have Voice Mail?	49
Before you choose the ring pattern to register	49
Registering the Distinctive Ring pattern Very important!	50
Turning off Distinctive Ring	50
Connecting an external TAD (telephone answering device)	51
Connections	51
Recording an outgoing message (OGM)	52
Multi-line connections (PBX)	52
External and extension telephones	52
Connecting an external or extension telephone	52
Using external and extension telephones	53
Using extension telephones	53
Using an external telephone (Connected to the EXT. jack of the machine)	53
If you answer a call and no one is on the line:	53
Using a non-Brother cordless external handset	53
Using Remote Codes	54
Fax Receive Code	54
Telephone Answer Code	54
Changing the Remote Codes	54
7 Dialing and storing numbers	55
How to dial	55
Manual dialing	55
One touch dialing	55
Speed Dialing	55
Search	56
Fax redial	56
Storing numbers	56
One Touch and Speed Dial Options	57
Storing a pause	58
Storing One Touch Dial numbers	58
Storing Speed Dial numbers	60
Changing One Touch and Speed Dial numbers	62
Deleting One Touch and Speed Dial numbers	63
8 Making copies	64
How to copy	64
Stop copying	64
Copy settings	64
9 How to print from a computer	65
Printing a document	65
10 How to scan to a computer	66
Scanning a document	66
Scanning using the scan key	66
Scanning using a scanner driver	67
A Routine maintenance	68
Replacing the consumable items	68
Replacing the toner cartridge	69
Toner Low	69
Replace Toner	69
Toner Ended	69
Replacing the toner cartridge	69
Cleaning the corona wire	74
Replacing the drum unit	75
Drum Error	76
Replace Drum	76
Drum Stop	76
Replacing the drum unit	76
Resetting the drum counter	79
B Troubleshooting	80
Error and maintenance messages	80
Transferring your faxes or Fax Journal report	85
Transferring faxes to another fax machine	85
Transferring faxes to your PC	85
Transferring Fax Journal report to another fax machine	85
Document Jams	86
Document is jammed in the top of the ADF unit	86
Document is jammed under the document cover	86
Removing small documents jammed in the ADF	87
Document is jammed at the output tray	87
Paper Jams	88
Paper is jammed in the standard paper tray	88
Paper is jammed at the back of the machine	89
Paper is jammed inside the machine	91
Paper is jammed in the Duplex Tray (MFC-7460DN and MFC-7860DW)	96
If you are having difficulty with your machine	98
Setting Dial Tone detection	107
Telephone line interference	107
Improving the print quality	108
Machine Information	118
Checking the Serial Number	118
Reset functions	118
How to reset the machine	119
C Menu and features	120
On-screen programming	120
Menu table	120
How to access the menu mode	120
Menu table	121
Entering text	138
D Specifications	140
General	140
Document Size	142
Print media	143
Fax	144
Copy	145
Scanner	146
Printer	147
Interfaces	148
Computer requirements	149
Consumable items	151
Network (LAN)	152
Index	153

Match case Limit results 1 per page

Init Unable XX

The machine has a mechanical

problem.



(For MFC-7360N and MFC-7460DN)

Received fax messages still in memory

will be lost when the machine is turned

off. See

Transferring your faxes or Fax

Journal report

on page 69 before

disconnecting the machine so you will

not lose any important messages.

Then, disconnect the machine from the

power for several minutes and then

reconnect it.

(For MFC-7860DW)

Disconnect the machine from the power

for several minutes, then reconnect it.



If the problem continues, call Brother

Customer Service.

Jam Duplex

The paper is jammed in the

duplex tray at the back of the

machine.

(See

Paper is jammed in the Duplex Tray

(MFC-7460DN and MFC-7860DW)

on page 80.)

Jam Inside

The paper is jammed inside the

machine.

(See

Paper is jammed inside the machine

on page 75.)

Jam Rear

The paper is jammed in the back

of the machine.

(See

Paper is jammed at the back of the

machine

on page 73.)

Jam Tray

The paper is jammed in the paper

tray of the machine.

(See

Paper is jammed in the standard paper

tray

on page 72.)

Limit Exceeded

The Page Limit set in Secure

Function Lock 2.0 for your ID was

reached.

Contact your administrator to check your

Secure Function Lock Settings.

Manual Feed

was selected as

the paper source when there was

no paper in the manual feed slot.

Place a sheet of paper in the manual feed

slot. (See

Loading paper in the manual feed

slot

on page 11.)

No Paper

The machine is out of paper or

paper is not properly loaded in the

paper tray.

Do one of the following:



Refill the paper in the paper tray and

press

Start



Remove the paper and load it again.

Then press

Start



If the problem is not resolved, the paper

pick-up roller may need to be cleaned.

Clean the paper pick-up roller. (See

Cleaning the paper pick-up rollers

Appendix A

of the

Advanced User's

Guide

No Response/Busy

The number you dialed does not

answer or is busy.

Verify the number and try again.

No Toner

The toner cartridge is not installed

correctly.

Pull out the drum unit. Take out the toner

cartridge and then put it back into the drum

unit.

Error Message

Cause

Action