Brother International MFC-7860DW Quick Setup Guide - English - Page 6

4 Connect the power cord and telephone line IMPORTANT DO NOT connect the interface cable yet. a Connect the AC power cord to the machine, and then plug it into an AC power outlet. b Turn on the machine's power switch. c Connect the telephone line cord. Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack. Note If you are sharing one telephone line with an external telephone, connect it as shown below. Before you connect the external telephone, remove the protective cap a from the EXT. jack on the machine. 1 2 1 1 Extension telephone 2 External telephone Note If you are sharing one telephone line with an external telephone answering machine, connect it as shown below. Before you connect the external telephone answering machine, remove the protective cap a from the EXT. jack on the machine. IMPORTANT The telephone line cord MUST be connected to the jack on the machine marked LINE. WARNING The machine must be grounded using a 3-prong plug. Since the machine is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power cord connected to your machine when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your machine by disconnecting the telephone line first and then the power cord. 1 Set the receive mode to External TAD if you have an external answering machine. See Choose the correct Receive Mode on page 8. For additional details, see Connecting an external TAD (telephone answering device) in the Basic User's Guide. 6