Brother International MFC-8710DW Quick Setup Guide - English - Page 29

For Wireless Network Users f Temporarily connect the USB cable (not included) directly to the computer and the machine. j Enter the Network Key you wrote down in step 20-a on page 26, and then click Next. g Do one of the following:  If the Installation confirmation screen appears, check the box and click Next, go to h.  Otherwise, go to i. h Check Yes if you want to connect with the listed SSID. Click Next and go to k. Note If your network is not configured for Authentication and Encryption, the ATTENTION! screen will appear. To continue configuration, click OK. k Confirm the wireless network settings and then click Next. The settings will be sent to your machine. i The wizard will search for wireless networks available from your machine. Choose the SSID that you wrote down for your network in step 20-a on page 26, and then click Next. Note • If the list is blank, check that the wireless access point/router has power and is broadcasting the SSID, and then see if the machine and the wireless access point/router are within range for wireless communication. Then, click Refresh. • If your wireless access point/router is set to not broadcast the SSID you can manually add it by clicking the Advanced button. Follow the on-screen instructions for entering the Name (SSID), and then click Next. Note • The settings will remain unchanged if you click Cancel. • If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network. • If the wireless setup failure screen appears, click Retry. l Disconnect the USB cable between the computer and the machine and then click Next. Wireless setup is now complete. A four level indicator at the top right of your machine's LCD will show the wireless signal strength of your wireless access point/router. To install the MFL-Pro Suite, continue to step 23-e on page 38. Now go to page 38 29 Windows® Macintosh Wireless Network