Brother International MFC-J430w Advanced Users Manual - English - Page 5
General setup, IMPORTANT NOTE, Memory storage, Volume Settings, Ring Volume - user manual
View all Brother International MFC-J430w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 General setup 1 IMPORTANT NOTE In this manual, the LCD messages of the MFC-J430W are used unless specified. Most of the illustrations in this User's Guide show the MFC-J430W. 1 1 Memory storage 1 Even if there is a power failure, you will not lose the settings you have chosen using the Menu key because they are stored permanently. Also, you will not lose your settings in the FAX and COPY mode key menus if you have chosen Set New Default. You may have to reset the date and time. Volume Settings 1 Ring Volume 1 You can choose a range of ring volume levels, from High to Off. While the machine is idle, press d or c to adjust the volume level. The LCD shows the current setting, and each key press will change the volume to the next level. The machine will keep the new setting until you change it. You can also change the volume through the menu, by following the instructions below: Setting the Ring Volume from the menu 1 a Press Menu. b Press a or b to choose General Setup. Press OK. c Press a or b to choose Volume. Press OK. d Press a or b to choose Ring. Press OK. e Press a or b to choose Low, Med, High or Off. Press OK. f Press Stop/Exit. 1