Brother International MFC-J625DW Quick Setup Guide - English - Page 25
Manual configuration, from the control panel, Windows, Macintosh - failed to connect
View all Brother International MFC-J625DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
For Wireless Network Users 19 Manual configuration from the control panel (Windows® and Macintosh) You must have the wireless settings you wrote down for your network in step 18-b on page 21 before you proceed. a On your machine, press Menu. Press s or t to display Network. Press Network. Press Setup Wizard. When Enable WLAN? is displayed, press Yes to accept. This will start the wireless setup wizard. To cancel, press No. b The machine will search for available SSIDs. It will take several seconds to display a list of available SSIDs. If a list of SSIDs is displayed, press s or t to choose the SSID you wrote down in step 18-b on page 21. Select the SSID you want to connect with. If the wireless access point/router of the selected SSID supports WPS and the machine asks to use WPS, go to c. If the machine asks you to enter a Network Key, go to d. Otherwise, go to e. Note • If a list of SSIDs is not displayed, make sure your access point is on. Move your machine closer to the access point and try starting from a again. • If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. For details, see the Network User's Guide. c Press Yes to connect your machine using WPS. (If you choose No to continue manual setting, go to d to enter a Network Key.) When the LCD shows Start WPS, press the WPS button on your wireless access point/router, and then press Next to proceed. Go to e. d Enter the Network Key you wrote down in step 18-b on page 21 using the Touchscreen. The letters appear in this order: lower case and then upper case. Press to cycle between letters, numbers and special characters. (The characters available may differ depending on your country.) To move the cursor to the right, press c. (For more information, see Entering Text for Wireless Settings on page 35.) Press OK when you have entered all the characters, then press Yes to apply your settings. e Your machine will now try to connect to your wireless network. It may take a few minutes. f A connection result message appears for 60 seconds on the LCD and a wireless LAN report will automatically be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 27. Wireless setup is now complete. A four level indicator at the upper left of your machine's LCD will show the wireless signal strength of your access point/router. To install MFL-Pro Suite, continue to step 20. For Windows® Users: Now go to Page 29 For Macintosh Users: Now go to Page 32 Wireless Network 25