Brother International MFC-J6710DW Quick Setup Guide - English - Page 6
DO NOT shake the ink cartridges. If ink stains, your skin or clothing, wash with soap or, detergent
UPC - 012502626633
View all Brother International MFC-J6710DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
g Unpack the ink cartridge. Turn the green release lever on the orange protective packing a clockwise until it clicks to release the vacuum seal. Then remove the orange protective packing a as shown. i Gently push the back of the ink cartridge marked "PUSH" until it clicks. After all the ink cartridges are installed close the ink cartridge cover. 1 1 Note The machine will prepare the ink tube system for printing. This process will take approximately four minutes. Do not turn off the machine. IMPORTANT DO NOT shake the ink cartridges. If ink stains your skin or clothing, wash with soap or detergent at once. h Take care to match the color of the lever a with the cartridge color b, as shown in the diagram below. Install each ink cartridge in the direction of the arrow on the label. 1 2 6