Brother International MFC-J835DW Quick Setup Guide - English - Page 31

For Wireless Network Users f Choose Temporarily use a USB cable (Recommended) and then click Next. i When the following screen appears, the wizard will search for wireless networks available to your machine. Choose the SSID that you wrote down for your network in step 17-a on page 28, and then click Next. Note If this screen appears, read the Important Notice. Check the box after you confirm the SSID and Network Key, and then click Next. g Temporarily connect the USB cable (not included) directly to the computer and the machine. Note • If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the machine and the access point are within range for wireless communication. Then click Refresh. • If your access point is set to not broadcast the SSID you can manually add it by clicking the Advanced button. Follow the on-screen instructions for entering the Name (SSID), and then click Next. If the confirmation screen appears, check the box and click Next, go to h. Otherwise, go to i. h When the following screen appears, check Yes if you want to connect to the listed SSID. Click Next and go to k. Wireless Network 31