Brother International S-7200B Service Manual - Page 63
Treadle Unit Assembly, 11-1. Types
View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
11. TREADLE UNIT ASSEMBLY 11. TREADLE UNIT ASSEMBLY 11-1. Types ・ The two types of treadle unit that are available are the type that controls the automatic presser foot lifter and the type that does not. ・ You can switch between the two types by changing the hooking position of the spring (1) inside the treadle unit; setting DIP switch 2; and setting the treadle stroke. Specifications Operation Difference in spring position Treadle unit G Does not control automatic presser lifter [a] Treadle unit H Controls automatic presser lifter [b] (1) (1) DIP switch setting 1839M DIP switch 2: OFF The presser foot lifter control signal is not output when the treadle is being depressed. 1840M DIP switch 2: ON The automatic presser foot lifter signal is output at the position before the treadle depression force suddenly changes. Signal setting Depression force Carry out the setting in "Setting method for standard depression strokes" on page 58. Set the neutral position, maximum forward position and maximum backward position. The depression force hardly changes at all from the start of depression until full depression. Carry out the setting in "Setting method for standard depression strokes" on page 58. Set the neutral position, maximum forward position and maximum backward position. The first modulation position for the treadle depression force is set automatically. The depression force suddenly changes at a point between the start of depression and full depression. Depression signal < When depressed forward > The sewing machine starts. < When depressed backward > The sewing machine starts. (NOTE 1) An automatic presser lifter signal is output at the point before the depression force suddenly changes, and the sewing machine starts at the point after the depression force suddenly changes. (NOTE 1) The presser foot lifter control signal is output while the treadle is depressed backward. However, if DIP switch 1 is set to OFF, the presser foot lifter control signal is not output when the treadle is depressed backward after the knee switch has been used to raise the presser foot. Furthermore, if Function No. 41 is set to "1", the presser foot lifter control signal is not output when the treadle is depressed backward. S-7200B 56