Brother International XL-2600i Operation Manual - Page 47
Shell Tuck Stitching, Costura de concha, Elastic Stitching, Costura elástica
View all Brother International XL-2600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
BUILT-IN STITCHES / PUNTADAS DE COSTURA INCORPORADAS Shell Tuck Stitching Costura de concha Elastic Stitching Costura elástica Stitch Name Nombre de la puntada Pattern Dibujo Length [mm (inch)] Longitud [mm (pulg.)] Shell Tuck Stitch Puntada de concha F-3 (1/64-1/8) Width [mm (inch)] Anchura [mm (pulg.)] 3-5 (1/8-3/16) The Shell Tuck Stitch can be used to sew a picot (lace-like) edge on lightweight fabric. La puntada de concha puede utilizarse para coser bordes con puntilla (parecido al encaje) en telas ligeras. Set the pattern selection dial to the Shell Tuck 1 Stitch. Ajuste el selector de puntadas en la puntada de concha. Adjust the thread tension so that it is tighter 2 than normal. Ajuste la tensión del hilo para que esté más tenso de lo normal. Place the fabric under the presser foot so that 3 it will be sewn along the bias, with the straight stitches sewn on the seamline and the zigzag stitches sewn slightly over the folded edge. Coloque la tela debajo del pie prensatela para coserla al bies con puntadas rectas en la línea de costura y con puntadas en zig-zag ligeramente por encima del borde doblado. Sew at a slow speed. 4 Cosa a una velocidad baja. Stitch Name Nombre de la puntada Pattern Dibujo Length [mm (inch)] Longitud [mm (pulg.)] Elastic Stitch Puntada elástica F-2.5 (1/64-3/32) Width [mm (inch)] Anchura [mm (pulg.)] 3-5 (1/8-3/16) You can use the Elastic Stitch for mending, sewing elastic or joining fabric. Each is explained below. Set the pattern selection dial to the Elastic Stitch. La puntada elástica puede utilizarse para zurcir, coser gomas o unir trozos de tela. A continuación se explica cada opción. Ajuste el selector de puntadas en la puntada elástica. ■ Mending / Zurcido Set the stitch length dial between "F" and 2.5. 1 Ajuste el control de longitud de puntada entre "F" y 2,5. Place the reinforcement fabric under the area 2 you want to mend. Coloque la tela de refuerzo debajo del área que desee zurcir. Following the line of the tear, sew using the 3 Elastic Stitch as shown. Siga la línea de la zona rasgada y cosa utilizando la puntada elástica como se muestra. 46