Brother International XL-2600i Operation Manual - Page 55
Adjusting Buttonholes, Ajuste de ojales
View all Brother International XL-2600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
SEWING BUTTONHOLES AND BUTTONS / COSTURA DE OJALES Y BOTONES Adjusting Buttonholes Ajuste de ojales If the stitching on the two sides of the buttonhole is not the same, you can make the following adjustments. Si la costura en los dos lados del ojal no es igual, puede realizar los siguientes ajustes. Set the stitch length dial between "F" and 1.5 1 and sew the buttonhole on a scrap piece of fabric to observe how the material is fed. Ajuste el control de longitud de puntada entre "F" y 1,5 y cosa el ojal en un retal para observar cómo se arrastra el material. If the right side of the buttonhole is too open 2 or tight, adjust the feeding of the material with the stitch length dial. Si el lado derecho del ojal está demasiado abierto o apretado, ajuste el avance del material con el control de longitud de puntada. 1 If the left side is too open or tight compared 4 with the right side, adjust the buttonhole fine- adjustment screw as described below. Si el lado izquierdo está demasiado abierto o apretado en comparación con el lado derecho, ajuste el tornillo de ajuste fino para ojales como se indica a continuación. If the left side is too open, turn the buttonhole fine-adjustment screw with a large screwdriver in the - direction. If the left side is too tight, turn the buttonhole fine-adjustment screw with a large screwdriver in the + direction. Si el lado izquierdo está demasiado abierto, gire el tornillo de ajuste fino para ojales con un destornillador grande en la dirección -. Si el lado izquierdo está demasiado apretado, gire el tornillo de ajuste fino para ojales con un destornillador grande en la dirección +. • This adjustment ensures both sides of the buttonhole are the same. Este ajuste asegura que ambos lados del ojal sean iguales. 2 1 3 2 3 4 4 1 Right side / Lado derecho 2 Shorter / Más corta 3 Longer / Más larga After obtaining a satisfactory feed on the right 3 side, stitch the buttonhole and observe the feeding. Tras obtener el avance satisfactorio del material en el lado derecho, cosa el ojal y observe el avance. 1 Stitch length dial / Control de longitud de puntada 2 Buttonhole fine-adjustment screw / Tornillo de ajuste fino de los ojales 3 Left side / Lado izquierdo 4 Buttonhole appearance / Aspecto del ojal 54