Brother International XL-2600i Operation Manual - Page 64
Using the Quilting Foot, Utilización del pie para, acolchados
View all Brother International XL-2600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Lower the presser foot lever and then tighten 5 the presser foot screw. Baje la palanca del pie prensatela y, a continuación, apriete el tornillo del pie. Using the Quilting Foot Utilización del pie para acolchados 1 1 Presser foot screw / Tornillo del pie prensatela CAUTION/PRECAUCIÓN ● Use a coin or screwdriver to tighten the screw securely. If the screw is loose, the needle may hit the presser foot and you may be injured. ● Before you start sewing, make sure you turn the handwheel toward you (counterclockwise) to check that the needle does not hit the presser foot. ● Be careful not to touch the needle, otherwise you may be injured. ● Utilice una moneda o un destornillador para apretar firmemente el tornillo. Si el tornillo está suelto, la aguja podría golpear el pie prensatela y usted podría resultar lesionado. ● Antes de comenzar a coser, asegúrese de girar la rueda hacia usted (hacia la izquierda) para comprobar que la aguja no golpea el pie prensatela. ● Tenga cuidado de no tocar la aguja pues, de lo contrario, podría resultar lesionado. Stitch Name Nombre de la puntada Straight Stitch Puntada recta Pattern Dibujo Length Width [mm (inch)] [mm (inch)] Longitud Anchura [mm (pulg.)] [mm (pulg.)] other Otro Any Cualquiera 2.5 (3/32) Darning Plate Placa de zurcir The Quilting Foot is useful for darning and free-motion machine quilting. El pie para acolchados resulta útil para zurcidos y y acolchados con la máquina en marcha libre. Turn off the machine. 1 Desconecte la alimentación de la máquina. Raise the needle and the presser foot. 2 Levante la aguja y el pie prensatela. Loosen the presser foot screw to remove the 3 presser foot holder. 5 Afloje el tornillo del pie prensatela para retirar el soporte del pie. 2 3 1 1 Use a coin or screwdriver / Utilice una moneda o un destornillador. 2 Presser foot holder / Soporte del pie prensatela 3 Presser foot screw / Tornillo del pie prensatela Note/Nota ● When sewing with the walking foot, sew at medium to low speeds. ● Cuando cosa con el pie móvil, utilice una velocidad de cosido entre media y baja. 63