Brother International XR-40 Accessory Catalog - Page 39

Brother Cover Stitch Feet 75 Go for stretch fabrics! Brother Cover Stitch is a great machine for sewing stretch fabrics. Using optional presser feet gives you more professional results. SA223CV SA222CV SA225CV Belt Loop Guide Bias Tape Folder Double Fold Binder Brother Cover Stitch Feet 76 Belt Loop Guide Use this guide to make belt loops or straps of 11 mm (1/2 inch) wide. 1. Set up your machine for 6 mm (approx. 1/4") wide stitch, two needles, three threads stitch. 2. Attach LC1 presser foot included in the machine. 3. Insert the tab on the belt-loop-sewing attachment into the front cover slot. 4. Make 25 mm (1") a fabric strap, and press 6 mm (approx. 1/4") of one side (lengthways). 5. Insert the fabric strap into the tape guide of the Belt Loop Guide. 6. Sew. Bias Tape Folder Folds and attaches 12 or 12.7 mm (1/2 inch) wide bias tape. You can use either self-made or store-bought bias tape. 1. Set up your machine for 6 mm (approx. 1/4") wide stitch, two needles, three threads stitch. 2. Attach LC1 presser foot included in the machine. 3. Insert the bias tape into the bias tape folder attachment. 4. Sew. Double Fold Binder Attaches 12 mm (approx. 1/2 inch) wide fabric tape as making it by folding 40 or 42 mm (approx. 1-1/2 inches) wide fabric. 1. Prepare a 40/42 mm (approx. 1-1/2") wide fabric tape. 2. Attach TB presser foot included in the machine. 3. Set the fabric tape through the folding binder, and set it under the presser foot. 4. Pull the fabric tape behind the presser foot. 5. Sew. www.brother.com