Brother International XR-40 Accessory Catalog - Page 4

Sew as you like. - used

Page 4 highlights

Brother General Sewing Accessories 05 Sew as you like. Use these utility presser feet and accessories to add a professional finish to your sewing projects. Adjustable Zipper & Piping Foot Brother General Sewing Accessories 06 Adjustable Zipper & Piping Foot Attaches zippers and pipings easily. Its position can be adjusted exactly on the edge of zipper/piping, avoiding the non-flat parts of zipper/piping, and presses the fabric with just right pressure. 1. Screw on the presser foot and select a straight stitch (left). 2. Position the presser foot over the long feed dogs on either left or right. 3. Loosen the clamp screw at the back of the presser foot and slide the presser foot so that the needle fits on the opening on the presser foot. 4. Check the needle does not hit the presser foot, and then tighten the clamp screw with a screwdriver. 5. Sew. Requires Low Shank Adapter for ULT series, PC-6500, PC-8200 and PC-8500 sewing machines. SA161 All Brother home-use sewing machines www.brother.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

www.brother.com
Brother
General
Sewing
Accessories
06
Adjustable Zipper & Piping Foot
SA161
All Brother home-use sewing machines
Brother
General
Sewing
Accessories
05
Sew as you like.
Use these utility presser feet and accessories to add a professional finish to
your sewing projects.
Adjustable Zipper & Piping Foot
Attaches zippers and pipings easily.
Its position can be adjusted
exactly on the edge of zipper/piping, avoiding the non-flat parts of
zipper/piping, and presses the fabric with just right pressure.
1. Screw on the presser foot and select a straight stitch (left).
2. Position the presser foot over the long feed dogs on either left or right.
3. Loosen the clamp screw at the back of the presser foot and slide the presser foot so that
the needle fits on the opening on the presser foot.
4. Check the needle does not hit the presser foot, and then tighten the clamp screw with a
screwdriver.
5. Sew.
Requires Low Shank Adapter for ULT series, PC-6500, PC-8200 and PC-8500 sewing
machines.