Brother International XR-40 Accessory Catalog - Page 40

Brother Cover Stitch Feet 77 Bias Tape Binding Set Hemming Set Bias Tape Binding Set Attaches 6 or 12 mm (approx. 1/4 to 1/2 inch) bias tapes as folding them. Attaching 6 mm (approx. 1/4") bias tape: Use the small bias tape sliding plate with the LC2 presser foot. Attaching 12 mm (approx. 1/2") bias tape: Use the large bias tape sliding plate with the LC1 presser foot (included with your Cover Stitch). 1. Set up your machine for a chain stitch, the center needle. 2. Insert the tab on the bias tape attachment into the front cover slot. 3. Set the bias tape though the holder (cut the end of fabric pointed so that it is easily set through the holder). 4. Sew as holding the fabric lightly with a tweezers. Brother Cover Stitch Feet 78 Top Stitching Foot Set Top Stitching Foot Set Use included presser foot to top stitch with 3 or 6 mm (approx. 1/8 or 1/4 inch) wide cover stitch. 1. Set T1/T2 presser foot. 2. Set up your machine for a cover stitch, with 3 or 6 mm wide cover stitch. 3. Open the seams. 4. Align the fabric joint and the groove of the presser foot, and sew. SA224CV SA221CV Hemming Set Finishes hems easily and quickly. The stitches are always smooth. 1. Set up your machine for a cover stitch, with the LC1 presser foot included in the machine. 2. Attach the hem positioning plate A/B to the hemming attachment, and attach it to your machine. 3. Fold fabric and set it into the guide. 4. Sew. SA226CV www.brother.com