Brother International XR-40 Accessory Catalog - Page 6

Narrow Hemmer Foot, Non Stick Foot, Overlock Foot, Picot Foot

Get Brother International XR-40 PDF manuals and user guides View all Brother International XR-40 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Brother General Sewing Accessories 09 Narrow Hemmer Foot Non Stick Foot Overlock Foot Picot Foot Brother General Sewing Accessories 10 SA126 ABCDEFJKMN SA127 GHILOP Skirt Innov-is Project Book (See page 50 for details.) Narrow Hemmer Foot Designed to create a flat narrow hem on lightweight fabrics. 1. Place the fabric with the wrong side facing up under the presser foot. 2. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches. 3. Raise the needle and the presser foot. 4. Hold the fabric from the back and front and roll it into the curled part of the foot. 5. Position the edge of the fabric behind the needle and lower the presser foot. 6. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot. 7. Continue to sew to the end of the fabric. Non Stick Foot Designed for consistent feeding with fabrics such as leather, vinyl and other novelty fabrics. Select a desired stitch and sew. Overlock Foot For vertical bobbin machines only. Sews overcast seams to protect edges from fraying. 1. Select an overlock stitch. 2. Attach the presser foot. 3. Lower the presser foot so that the foot guide is exactly against the edge of the fabric. 4. Sew along the guide. SA135 GHILOP Picot Foot Creates shell-looking edges on sheer and very lightweight fabrics. 1. Increase upper thread tension. 2. Place the fabric with the wrong side facing up under the presser foot. 3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches. 4. Raise the needle and the presser foot. 5. Hold the fabric from the back and front and roll it into the curled part of the foot. 6. Position the edge of the fabric behind the needle and lower the presser foot. 7. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot. 8. Continue to sew to the end of the fabric. SA164 ABCDEFJKMN SA149 GHILOP SA114 ABCDEFGHJKLMNO SA122 IP Travel Jewelr y Portfolio Innov-is Project Book (See page 53 for details.) www.brother.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
www.brother.com
Brother
General
Sewing
Accessories
10
Overlock Foot
Picot Foot
SA135
GHILOP
Brother
General
Sewing
Accessories
09
Narrow Hemmer Foot
Non Stick Foot
Narrow Hemmer Foot
Designed to create a flat narrow hem on lightweight fabrics.
1. Place the fabric with the wrong side facing up under the presser foot.
2. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.
3. Raise the needle and the presser foot.
4. Hold the fabric from the back and front and roll it into the curled part of the foot.
5. Position the edge of the fabric behind the needle and lower the presser foot.
6. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.
7. Continue to sew to the end of the fabric.
SA127
GHILOP
SA126
ABCDEFJKMN
SA114
ABCDEFGHJKLMNO
SA122
IP
Non Stick Foot
Designed for consistent feeding with fabrics such as leather, vinyl and
other novelty fabrics.
Select a desired stitch and sew.
Overlock Foot
For vertical bobbin machines only.
Sews overcast seams to protect edges from fraying.
1. Select an overlock stitch.
2. Attach the presser foot.
3. Lower the presser foot so that the foot guide is exactly against the edge of the fabric.
4. Sew along the guide.
Picot Foot
Creates shell-looking edges on sheer and very lightweight fabrics.
1. Increase upper thread tension.
2. Place the fabric with the wrong side facing up under the presser foot.
3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.
4. Raise the needle and the presser foot.
5. Hold the fabric from the back and front and roll it into the curled part of the foot.
6. Position the edge of the fabric behind the needle and lower the presser foot.
7. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.
8. Continue to sew to the end of the fabric.
SA164
ABCDEFJKMN
SA149
GHILOP
Innov-is Project Book
(See page 50 for details.)
Skirt
Innov-is Project Book
(See page 53 for details.)
Travel Jewelry Portfolio