Canon 10 X 32 IS 10x32 IS 12x32 IS 14x32 IS Instructions
Canon 10 X 32 IS Manual
 |
View all Canon 10 X 32 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon 10 X 32 IS manual content summary:
- Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 1
ENG Instructions - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 2
Thank you for purchasing a Canon product. The Canon 10x32 IS (10x), 12x32 IS (12x), and 14x32 IS (14x) prism binoculars are equipped with a lens-shift type Image Stabilizer. Before using the binoculars, read this instruction booklet to familiarize yourself with the proper operation. Also, please - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 3
Details pertaining to risks that may result in death or serious injury. zzNever look at the sun with the binoculars. Doing so can cause loss of vision. zz Do not place the binoculars under direct sunlight. Otherwise, the lens may concentrate the sun's rays and cause a fire. zz Keep the plastic bags - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 4
. Do not drop them or subject them to shock. Never attempt to disassemble them. zz Do not place these binoculars underwater. Also, avoid exposing the binoculars to rain or water spray. zz Do not store the binoculars in a car or similar location under direct sunlight. Doing so will cause the - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 5
are not to be used for an extended period, clean the lenses and body thoroughly and store in a well-ventilated dry place. zz If the binoculars are taken from a cold environment to a warm one, condensation may develop on the surface and internal parts due to the sudden change in temperature. To - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 6
Nomenclature POWERD IS button Lamp Image Stabilizer button (The 14x32 IS is shown in the illustrations.) Focusing knob Objective lenses Eyecup Objective lens protector Dioptric correction scale Battery chamber cover Dioptric correction - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 7
Using the Lens Caps Attaching Eyepiece Lens Caps zzAttach them over the eyecups. Installing the Strap 1 Fasten the strap. zzMake sure that there is no slack and the strap does not loosen at the clasp when you pull it. 2 Connect the objective lens caps. zzInstall the string included in the package to - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 8
3 Check that the lamp lights. zzPress the Image Stabilizer button or POWERD IS button and check that are found on page 3-4 of this manual. zzDo not load the batteries backwards. Doing batteries. Battery Life (Continuous Use) (Based on Canon's testing conditions) Size-AA alkaline batteries* 23°C / - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 9
, turn the eyecups to adjust the height for easy viewing. 2 Adjust the width of the binoculars. zzLook through the binoculars and adjust the angle of the eyepieces until the left and right images converge. zzDoing the above minimizes eye fatigue during viewing. zzWhen adjusting the width of the - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 10
may be shaking and difficult to see since your hands are holding the binoculars. In such a case, the Image Stabilizer can help steady the image. zzThe binoculars feature a general IS, which provides image stabilization when looking at a wide area, and a POWERD IS, which is especially effective when - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 11
, such as when they are hanging from the strap, the Image Stabilizer will turn off to conserve power. To use the binoculars in a downward direction, keep pressing the Image Stabilizer button or the POWERD IS button. zzEven without batteries loaded, the binoculars can still be used as is. ENG-10 - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 12
Using the Case zzPlace the binoculars in the case while allowing the strap to extend outside the case. zzClose the zipper to where the strap extends from the case and then close the case flap. ENG-11 - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 13
Troubleshooting If there is a problem with the binoculars, first refer to the table below to see if you can resolve it. If the problem cannot be resolved, contact your dealer or nearest Canon Service Center. Problem The image is not clear. The Image Stabilizer does not operate. When the Image - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 14
at 1000 m / yds Exit pupil diameter Eye relief Focusing distance range Image Stabilizer system Correction angle Battery check Power Operating environment Dimensions (W x H x D) Weight (Excluding batteries) 10x32 IS 10x 6° 12x32 IS Prism binoculars 12x 32 mm 5° 14x32 IS 14x 4.3° 55.3° 55.5° 105 - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 15
the equipment unless otherwise specified in the instructions. If such changes or modifications should be stop operation of the equipmet. This equipment has been tested and found to comply with the limits for a Class service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery. ENG-14 - Canon 10 X 32 IS | 10x32 IS 12x32 IS 14x32 IS Instructions - Page 16
CT1-B033-A 0317Ni © CANON INC. 2017
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Instructions
ENG