Canon 3093B002 User Manual

Canon 3093B002 Manual

Get Canon 3093B002 PDF manuals and user guides View all Canon 3093B002 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon 3093B002 manual content summary:

  • Canon 3093B002 | User Manual - Page 1
    Cover Document Scanner User Manual ♦ Please read this manual before operating this scanner. ♦ After you finish reading this manual, store it in a safe place for future reference. 1 DR-3010C
  • Canon 3093B002 | User Manual - Page 2
    , WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON ELECTRONICS INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL. 2 DR-3010C
  • Canon 3093B002 | User Manual - Page 3
    . Contents Introduction 3 Symbols Used in This Manual 3 Chapter 1 Before Using the Scanner 5 1. Important Safety Instructions 5 Installation Location 5 AC Adapter 6 Moving the Scanner 6 Handling 7 Disposal 8 2. Features of the DR-3010C Document Scanner 8 3. Names and Functions of
  • Canon 3093B002 | User Manual - Page 4
    Retard Roller 71 Removing/Attaching the Document Holding Guide 73 Resetting the Counter 74 Chapter 7 Troubleshooting 75 1. Troubleshooting 75 2. Uninstalling the Software 79 Uninstalling the 82 Specifications 82 Replacement Parts 83 External Dimensions 84 INDEX 86 4 DR-3010C
  • Canon 3093B002 | User Manual - Page 5
    sure to read the safety warnings and precautions described below. 1. Important Safety Instructions 5 Installation Location 5 AC Adapter 6 Moving the Scanner 6 Handling 7 Disposal 8 2. Features of the DR-3010C Document Scanner 8 3. Names and Functions of Parts 10 Installation Location The
  • Canon 3093B002 | User Manual - Page 6
    -4315 • If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. Moving the Scanner • When moving the scanner, always hold it with these items connected, the plugs and connectors may be damaged. 6 DR-3010C
  • Canon 3093B002 | User Manual - Page 7
    switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative for further information. • Do not drop the scanner, or subject it to impact or strong is possible to cut your hand on the edge of a sheet of paper. 7 DR-3010C
  • Canon 3093B002 | User Manual - Page 8
    . 2. Features of the DR-3010C Document Scanner The main features of the DR-3010C document scanner are described below supports Hi-Speed USB 2.0. „ Color/Grayscale Support Documents can be scanned in 24-bit color or 256-level grayscale. „ Supports a Variety of Scanning Modes The scanner supports
  • Canon 3093B002 | User Manual - Page 9
    documents can be detected by installing the optional bar code module. NOTE Some functions may not be available, depending on the software you are using. 9 DR-3010C
  • Canon 3093B002 | User Manual - Page 10
    placing documents. Power Indicator This indicator lights blue when the scanner is turned ON. Document Guides Adjust these guides to fit the width of the document. (See p.22.) „ Front View (With . USB Connector Connect a USB cable that supports Hi-Speed USB 2.0 to this connector. 10 DR-3010C
  • Canon 3093B002 | User Manual - Page 11
    (Bypass mode). (See p.24.) Paper Eject Stopper Use the paper eject stopper that corresponds to the length of the documents you want to scan. 11 DR-3010C
  • Canon 3093B002 | User Manual - Page 12
    the Scanner to the Computer 16 3. Turning the Power ON 18 Scanner Recognition 18 1. Scanner System Requirements To use the DR-3010C scanner, your computer must satisfy the following system requirements. • Operating systems: y Microsoft Windows 2000 Professional SP4 or later y Microsoft Windows
  • Canon 3093B002 | User Manual - Page 13
    ISIS compatible application developed for use with Canon document scanners. NOTE The Setup disc of the DR-3010C is configured as follows. Install the software using either Typical Installation or Custom Installation. Menu Screen Typical Installation Read Manuals Custom Installation 13 DR-3010C
  • Canon 3093B002 | User Manual - Page 14
    ] to accept it. NOTE When you select [Typical Installation], all of the displayed software and the User Manual will be installed automatically. If you want to reinstall only specific software that you have previously uninstalled, select [Custom Installation] and specify the software. 14 DR-3010C
  • Canon 3093B002 | User Manual - Page 15
    7 When the driver installation is complete, click [Finish]. 10 Confirm the installation location → click [Next]. 8 Click [Next]. 11 When the CapturePerfect 3.0 installation is complete, click [Finish]. 9 Read the license agreement → click [Yes] to accept it. 12 Click [Next]. 15 DR-3010C
  • Canon 3093B002 | User Manual - Page 16
    13 When the User Manual installation is complete, click [Finish]. 14 Click [Exit] to finish installing the software. 1 Verify that the power switch of the scanner is OFF ( setting). 15 Remove the DR-3010C Setup disc from the CD-ROM drive. 2 Connect the power cord to the AC adapter. 16
  • Canon 3093B002 | User Manual - Page 17
    3 Connect the plug of the AC adapter to the power connector on the back of the scanner. 120 V model 4 Use the supplied USB cable to connect the scanner to the computer. 220-240 V model 17 DR-3010C
  • Canon 3093B002 | User Manual - Page 18
    not be using the scanner for an extended period, you should disconnect the power cord from the AC outlet for safety. 3 Windows automatically recognizes the DR-3010C as new hardware. NOTE If you set the power switch on the back of the scanner to 'AUTO', the scanner is linked to be automatically
  • Canon 3093B002 | User Manual - Page 19
    Width: 1.97" to 8.5" (50 mm to 216 mm) Length: 2.12" to 14.02" (53.9 mm to 356 mm)* Paper weight Page Separation mode: 14 to 54 lb bond (52 to 209 g/m2) Bypass mode: 0.0024" to 0.01" (0.06 mm to 0. scanner to the Long Document mode. (See "Setting the Long Document Mode," on p.36.) 19 DR-3010C
  • Canon 3093B002 | User Manual - Page 20
    one sheet at a time. • Scanning documents before the ink is dry can cause problems with the scanner. Always make sure that the ink on a document is dry Size: 1.97" x 2.12" (50 mm x 53.9 mm) or larger Paper weight: 140 lb bond (300 g/m2) 0.0138" (0.35 mm) or less IMPORTANT If . 20 DR-3010C
  • Canon 3093B002 | User Manual - Page 21
    eject tray when you want to stack output documents. • Use the extension tray when the document hangs over the edge of the main tray. 21 DR-3010C
  • Canon 3093B002 | User Manual - Page 22
    first. 2 Adjust the document guides to fit the width of the document to be scanned. IMPORTANT There is a load limit mark ( ) on the document guides. Do not stack documents higher than this mark (approximately 50 sheets of 20 lb bond (80 g/ m2) paper.) Doing so may cause a paper jam. 22 DR-3010C
  • Canon 3093B002 | User Manual - Page 23
    5 Adjust the document guides to fit the width of the document feeding stops due to a system error or paper jam while the scanner is scanning, resolve the problem, make sure that the scanned image of the last page that was successfully fed has been stored, power outlet to stop scanning. 23 DR-3010C
  • Canon 3093B002 | User Manual - Page 24
    being used. Placing Cards 1 Switch the feed selection lever to (Bypass). 2 Adjust the document guides to fit the width of the document to be scanned. (See p.22.) 3 Place the at a time. 2 Adjust the document guides to fit the width of the card to be scanned. (See p.22.) 24 DR-3010C
  • Canon 3093B002 | User Manual - Page 25
    function, fold the document in half lengthwise and place it into the feeder. The DR-3010C will scan both sides and combine the scanned images into a single image. CAUTION • Adjust the document guides to fit the width of the document. Otherwise, the image may scan as skewed or shifted. 25 DR-3010C
  • Canon 3093B002 | User Manual - Page 26
    document size, click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select [Auto-detection] from the Page Size drop Guide and CapturePerfect Online Help. 1 From the Windows task bar, click [Start] → [All Programs] → [CapturePerfect 3.0] → [CapturePerfect 3.0]. 26 DR-3010C
  • Canon 3093B002 | User Manual - Page 27
    on p.22.) 8 From the [Scan] menu, select [Scan Batch to File]. NOTE • The Configure Device Settings dialog box is displayed only when you select [CANON DR-3010C] in the [Select Scanner] dialog box for the first time and click [OK], and when you click [Settings] for the [Select Scanner] dialog box
  • Canon 3093B002 | User Manual - Page 28
    , the location to save the file. 1 From the Windows task bar, click [Start] → [All Programs] → [Canon DR3010C] → [Job Registration Tool]. 11 After scanning is complete, select [Exit] from the [File] menu to quit registering the jobs that are executed when the Start key is pressed. 28 DR-3010C
  • Canon 3093B002 | User Manual - Page 29
    on p.56. 5 Press the Plus key or Minus key to select the job number of the Display Panel(c) → press the Start key(d). 6 The Monitor for DR-3010C dialog box is displayed, and scanning starts. NOTE • You can register jobs from No. 1 to No. 9. • The following jobs are registered in the Registered
  • Canon 3093B002 | User Manual - Page 30
    or black and white, and save it as a color image or black and white image accordingly. Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select [Auto Color Detection] from the Mode drop-down list → click [OK]. For more information on setting the scanning conditions, see Chapter
  • Canon 3093B002 | User Manual - Page 31
    sides of an 11" x 17"/A3 document folded in half to be combined as a single image. Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select [Folio] from the Scanning Side drop-down list → click [OK]. For more information on setting the scanning conditions, see "Placing Folded
  • Canon 3093B002 | User Manual - Page 32
    scanned image. However, this function is only available when scanning in black-and-white. Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box → select the colors to omit from the Front and Back drop-down lists → click [OK]. For more information on setting the scanning
  • Canon 3093B002 | User Manual - Page 33
    white scanning. Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box → select [Red Enhance] from the Front and Back on setting the scanning conditions, see the CapturePerfect3.0 Operation Guide. Specifying Security Settings for PDF Files You can specify security
  • Canon 3093B002 | User Manual - Page 34
    , take care not to cut your hands on the edges of the paper. 1 Remove any documents that have been left in the eject tray. 34 DR-3010C
  • Canon 3093B002 | User Manual - Page 35
    correctly, and then continue scanning. • If a paper jam occurs when [Rapid recovery system] is enabled in the [Others] tab in the Properties for Canon DR-3010C dialog box, the image data of the document is not saved and scanning stops. This allows you to continue scanning from the document that
  • Canon 3093B002 | User Manual - Page 36
    Classic View, double-click [Scanners and Cameras]. IMPORTANT When scanning in the Long Document mode, click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select [Auto-detection] from the Page Size drop-down list → click [OK]. This allows the scanner to detect and scan documents
  • Canon 3093B002 | User Manual - Page 37
    4 Click the [Maintenance] tab → click the [Long Document mode (1,000 mm)] radio button. 5 Click [Apply] → [OK]. 6 Turn the scanner OFF, and then ON again. 37 DR-3010C
  • Canon 3093B002 | User Manual - Page 38
    to select the scanner using CapturePerfect 3.0. 1 From the Windows task bar, click [Start] → [All Programs] → [CapturePerfect 3.0] → [CapturePerfect 3.0]. 2 From the [Scan] menu, select [Select Scanner]. 3 Select [CANON DR-3010C] → click [OK]. 38 DR-3010C
  • Canon 3093B002 | User Manual - Page 39
    conditions. For details on each setting, also refer to the Help. NOTE • The Configure Device Settings dialog box is displayed only when you select [CANON DR-3010C] in the [Select Scanner] dialog box for the first time and click [OK], and when you click [Settings] for the [Select Scanner] dialog box
  • Canon 3093B002 | User Manual - Page 40
    Mode Settings This section describes the procedure for setting the scan mode to suit your needs. 1 Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select the scanning mode from the Mode drop-down list → click [OK]. NOTE • You can select the following modes, according to
  • Canon 3093B002 | User Manual - Page 41
    to automatically detect whether a document is in color or black-and-white when scanning. 1 Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select [Auto Color Detection] from the Mode drop-down list → click [Setting]. Deskew Moire Reduction Edge emphasis Prevent Bleed
  • Canon 3093B002 | User Manual - Page 42
    ] tab. Paper Size Settings This section describes the procedure for selecting the size for scanning. 1 Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select the page size from the Page Size drop-down list → click [OK]. NOTE • Click [Auto-detection] to scan the following
  • Canon 3093B002 | User Manual - Page 43
    Side Settings This section describes the procedure for setting the page side settings for scanning. 1 Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select the page side to scan from the Scanning Side drop-down list → click [OK]. NOTE • Higher resolutions provide clearer
  • Canon 3093B002 | User Manual - Page 44
    for setting the scanner to detect slanted document pages and straighten the scanned images. 1 Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select the [Deskew] check box → click [OK]. y The Content density setting should be adjusted according to the document content, so
  • Canon 3093B002 | User Manual - Page 45
    Adjusting the Scan Area This section describes the procedure for scanning part of a document image. 1 Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → click [Area] → click [OK]. NOTE • The [High Speed Moire Reduction] is displayed only when a resolution of 240 dpi or less
  • Canon 3093B002 | User Manual - Page 46
    the Unit setting. Preview Button (TWAIN driver only) Click [Preview] to scan one document page and display its preview image in the Area window. 46 DR-3010C
  • Canon 3093B002 | User Manual - Page 47
    This section describes the procedure for adjusting the brightness and contrast for scanning. 1 Click the [Brightness] tab in the Properties for Canon DR-3010C dialog box → adjust the [Brightness] slider and [Contrast] slider to adjust the brightness and contrast for scanning → click [OK]. • The
  • Canon 3093B002 | User Manual - Page 48
    This section describes the procedure for adjusting the gamma level for scanning documents. 1 Click the [Brightness] tab in the Properties for Canon DR-3010C dialog box → click [Gamma] → click [OK]. 2 Select the [Custom] check box in the Gamma Settings dialog box → specify the settings as
  • Canon 3093B002 | User Manual - Page 49
    the Edge emphasis slider to adjust the contours of the scanned image → click [OK]. 1 Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box → select the angle to rotate the image from the Document Orientation drop-down list → click [OK]. NOTE Move the slider toward
  • Canon 3093B002 | User Manual - Page 50
    on the back side, or to remove the background from document images. 1 Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box → select the [Prevent Bleed Through / Remove Background] check box → click [Setting]. NOTE • When the [Text Orientation Recognition] check box
  • Canon 3093B002 | User Manual - Page 51
    omit from the Front and Back drop-down lists under → click [OK]. 1 Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box → select [Red Enhance] from the Front and Back drop-down lists under → click [OK]. NOTE You can specify different
  • Canon 3093B002 | User Manual - Page 52
    scanner when document feeding stops due to a paper jam or other error during scanning. 1 Click the [Others] tab in the Properties for Canon DR-3010C dialog box → select the [Rapid recovery system] check box → click [OK]. Double Feed Detection This section describes the procedure for setting the
  • Canon 3093B002 | User Manual - Page 53
    tab in the Properties for Canon DR-3010C dialog box → select the guide position. [Automatic Feeding] This feeding method is good for scanning batches of the same sized documents. Scanning starts when the scanner detects the placed documents, and stops when you press the Stop button. 53 DR-3010C
  • Canon 3093B002 | User Manual - Page 54
    necessary using the sliders or up/down buttons → click (Start) to save the scanned image. 1 Click the [Others] tab in the Properties for Canon DR-3010C dialog box → select the [Prescan] check box → click [OK]. 2 From the [Scan] menu, select [Scan Batch to File]. Specify the location, file name
  • Canon 3093B002 | User Manual - Page 55
    as necessary in the [Basic], [Brightness], [Image processing], and [Others] tabs in the Properties for Canon DR-3010C dialog box. 1 Click the [Basic] tab in the Properites for Canon DR-3010C dialog box → click [About]. 2 Click the [Basic] tab → click [Save]. 3 In the Save User Preference
  • Canon 3093B002 | User Manual - Page 56
    be executed by the operation panel. Use the following procedure to start the Job Registration Tool. 1 From the Windows task bar, click [Start] → [All Programs] → [Canon DR3010C] → [Job Registration Tool]. 56 DR-3010C
  • Canon 3093B002 | User Manual - Page 57
    ] from the [Editing] menu to display the New/Editing dialog box. [Close] Button Closes the Job Registration Tool dialog box. 57 Attach to E-mail Launcher DR-3010C
  • Canon 3093B002 | User Manual - Page 58
    functions, the New/Editing dialog box is changed. NOTE For more information on the scanner settings, see Chapter 4, "ISIS/TWAIN Driver Settings," on p.38. 58 DR-3010C
  • Canon 3093B002 | User Manual - Page 59
    : This compression format is for saving grayscale and color images. When the [Compression] check box is selected, a standard level of JPEG compression is applied. 59 DR-3010C
  • Canon 3093B002 | User Manual - Page 60
    y If your application program does not support the above compression formats, you may be unable to open scanned image files. In this case, disable [Compression] when scanning. The compression ratio is 10. y [User]: Use to specify the compression ratio from 0 to 100 using the slide bar. 60 DR-3010C
  • Canon 3093B002 | User Manual - Page 61
    on the scanner. The following describes how to register ISIS/TWAIN-compatible applications as events. 1 From the Windows task bar, click [Start] → [Control Panel]. 61 DR-3010C
  • Canon 3093B002 | User Manual - Page 62
    → select [Scan Button] in [Scanner events]. Control Panel (Category View) Printers and Other Hardware Control Panel (Classic View) 3 Right-click [CANON DR-3010C USB] → click [Properties]. IMPORTANT • Do not change the settings by selecting [Job Tool] in [Scanner events]. The job function may
  • Canon 3093B002 | User Manual - Page 63
    IMPORTANT Do not select [DR-3010C Job Tool] displayed in the [Send to this application] list. The job function will not run correctly. NOTE • If multiple want to limit the space available in a destination folder by registering the folder number and specifying a warning size. 63 DR-3010C
  • Canon 3093B002 | User Manual - Page 64
    a warning message appears, follow the instructions in the message to either continue scanning or change the save destination before continuing scanning. Monitor Job Dialog Settings „ [Show Monitor Dialog] Check Box Select this check box to display the Monitor for DR-3010C dialog box to display job
  • Canon 3093B002 | User Manual - Page 65
    mm). NOTE As shown in the job number 3 diagram, the end of job titles with a text string that is too long are abbreviated with '...'. 65 DR-3010C
  • Canon 3093B002 | User Manual - Page 66
    /Attaching the Feed Roller 69 Removing/Attaching the Retard Roller 71 Removing/Attaching the Document Holding Guide 73 Resetting the Counter 74 CAUTION • When cleaning the scanner and the inside of the scanner and then clean out any paper particles remaining inside the scanner. 66 DR-3010C
  • Canon 3093B002 | User Manual - Page 67
    well as feeding errors. If there are scratches on the sensor glass, contact your local authorized Canon dealer or service representative. 5 Clean the c rollers by wiping the exposed part without turning them. Clean the cloth to wipe away any moisture. Retard Roller d c Feed Roller 67 DR-3010C
  • Canon 3093B002 | User Manual - Page 68
    and thoroughly wrung out. f e 7 Wipe the document holding guide with a cloth that has been dampened with water and thoroughly wrung out. Document Holding Guide 10 Reattach the feed roller and retard roller. (See p.70 when cleaning is finished. 12 Close the document eject tray. 68 DR-3010C
  • Canon 3093B002 | User Manual - Page 69
    74.) • For information about the exchange roller kit (feed roller, retard roller, and the document holding guide), contact your local authorized Canon dealer or service representative. 3 Open the roller cover by placing your fingers in the grooves and pulling it down. Roller Cover 69 DR-3010C
  • Canon 3093B002 | User Manual - Page 70
    into the hole on the left of the feed roller. 3 Push down the lever to lock the shaft of the feed roller into place. 70 DR-3010C
  • Canon 3093B002 | User Manual - Page 71
    hear a click. 1 Open the document eject tray. (See p.21.) 2 Press the OPEN button (c) while pulling the front unit open (d). d c 6 Close the document eject tray. 71 DR-3010C
  • Canon 3093B002 | User Manual - Page 72
    to detach it from its shaft, and pull it out. 3 Push down the lever to lock the shaft of the feed roller into place. 72 DR-3010C
  • Canon 3093B002 | User Manual - Page 73
    click. 1 Open the roller cover, and slide the document holding guide to remove it. 6 Close the document eject tray. Attaching the Document Holding Guide 1 Fit the hooks (four) of the document holding guide onto the roller cover, and slide the document holding guide to attach it. 73 DR-3010C
  • Canon 3093B002 | User Manual - Page 74
    the counter settings dialog box and reset the counter. 1 From the Windows task bar, click [Start] → [Control Panel]. 3 Right-click [CANON DR-3010C USB] → click [Properties]. 4 Click the [Maintenance] tab → [Reset]. 2 If the Control Panel is displayed with the Category View, click [Printers
  • Canon 3093B002 | User Manual - Page 75
    problem, contact your local authorized Canon dealer or service Problem Solution The scanner is not connected correctly Make sure that the scanner and the computer are connected correctly with the USB cable. (See "Chapter 2 Setup - Connecting the Scanner to the Computer," on p.16.) 75 DR-3010C
  • Canon 3093B002 | User Manual - Page 76
    Canon dealer or service representative for more information. The scanner does not support weight that the scanner cannot scan. Check the size, thickness, and weight of the document. For information on the type of documents that you can use with the scanner, see "1. Documents," on p.19. 76 DR-3010C
  • Canon 3093B002 | User Manual - Page 77
    guide adapter to prevent document skew. Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select the [Deskew] check box. Symptoms Problem scratched. Contact your local authorized Canon dealer or service representative. Symptoms Problem Solution There are abnormalities in the
  • Canon 3093B002 | User Manual - Page 78
    Code Problem Solution This error code is displayed if another type of error occurs. Turn off the power switch, wait 10 seconds, and then turn the power switch on again. If the "E" error code is still displayed, contact your local authorized Canon Dealer, or service representative. 78 DR-3010C
  • Canon 3093B002 | User Manual - Page 79
    ] → [Control Panel]. The [Add or Remove Programs] dialog box appears. Uninstalling the ISIS/TWAIN Driver and Job Registration Tool 1 From the Programs list, click [Canon DR-3010C Driver] (or [DR-3010C Job Tool]) → click [Remove]. 2 Double-click [Add or Remove Programs]. 79 NOTE If you clicked
  • Canon 3093B002 | User Manual - Page 80
    2 Click [Yes] in the DR-3010C Setup dialog box. Uninstalling CapturePerfect 3.0 1 From the Programs list, click [CapturePerfect 3.0] → [Remove]. NOTE To remove the Job File dialog box → click [Yes]. After the uninstallation procedure is complete, click [OK]. 3 Click [Finish]. 80 DR-3010C
  • Canon 3093B002 | User Manual - Page 81
    document feed tray while the back of the document guide is unsnapped from the document feed tray. 1 Push the document guides to the center of the machine. 2 Pull up the document guides while holding the document feed tray to unsnap the document guides from the document feed tray. 81 DR-3010C
  • Canon 3093B002 | User Manual - Page 82
    See "Setting the Long Document Mode," on p. 36.) Business Card Size: 1.97" x 2.12" (50 mm x 53.9 mm) or larger Paper weight: 140 lb bond (300 g/m2) 0.0138" (0.35 mm) or less Card Size: 2.12" x 3.37" (53.9 mm x 85.5 mm) 200 x 200 dpi 60 images/min. 300 x 300 dpi 60 images/min. 82 DR-3010C
  • Canon 3093B002 | User Manual - Page 83
    Input Output Weight MG1-4315 guide, see "Removing/ Attaching the Document Holding Guide," on p. 73. • Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts. Product specifications are subject to change without notice. 83 DR-3010C
  • Canon 3093B002 | User Manual - Page 84
    7.8" (197 mm) (9.1" (230 mm)) (With tray open) External Dimensions 12.2" (310 mm) 11.5" (292 mm) (23.0" (583 mm)) (With tray open) 84 DR-3010C
  • Canon 3093B002 | User Manual - Page 85
    used in accordance with the instructions, may cause harmful interference service. For more information regarding return and recycling of WEEE products, please visit www.canon-europe.com. (EEA: Norway, Iceland and Liechtenstein) MODEL NAMES Model DR-3010C is identical to model M11066. Model DR-3010C
  • Canon 3093B002 | User Manual - Page 86
    area 10 Document eject tray 10 Document feed tray 10 Document feeder 10 Document guides 10 Document holding guide Attaching 73 Removing 73 Documents ...19 Placing...22 Double feed detection 52 Driver...13 43 Text orientation, correcting 50 Version, checking 55 J Job function...28 DR-3010C
  • Canon 3093B002 | User Manual - Page 87
    Scan Panel ...30 Scanning methods 26 Service...75 Setup disc...13 Custom Installation 13 Read Manuals 13 Typical Installation 13 Software Installing 13 System requirements 12 T Troubleshooting 75 Typical Installation 14 U USB connector 10 USB Link switch 8 PUB. CE-IE-632-02 87 DR-3010C
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
DR-3010C
DR-3010C
Document Scanner
User Manual
♦
Please read this manual before operating this scanner.
♦
After you finish reading this manual, store it in a safe place for future reference.
1
Cover