Canon 45 MC ZR50 ZR45MC Instruction Manual - Page 123
Select MIX TYPE.
UPC - 013803010510
View all Canon 45 MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
4. Select MIX TYPE. • CARD CHROMA, CARD LUMI., CAM. CHROMA settings appear. E 5. Select the desired setting. • Your currently recording image is combined with the pre-recorded still image. 6. Select MIX LEVEL. 7. Adjust the mix level. • Turning the selector dial upwards adjusts to the right and turning downwards adjusts to the left. 8. Close the menu. • CARD MIX flashes in the display. On/Off 9. Press the card MIX button. • CARD MIX stops flashing. • Your currently recording image is combined with the pre-recorded still image. • Each time you press the card MIX button, your selection is activated (display lights continuously) or deactivated (display flashes). Using a Memory Card For movies 1. Press the start/stop button to start and stop recording. • The combined images are recorded onto the cassette. For stills 1. Press the PHOTO button halfway down and hold it. • F flashes white in the display as the camcorder adjusts the focus and it is displayed continuously as a green mark when the camcorder is ready to take the image. 2. Press the PHOTO button fully down to record the image to the cassette. • F disappears from the display. • The combined images are recorded onto the cassette for approximately 6 seconds ( 8 seconds in the SP or LP recording mode). Notes: • If you change the position of the POWER switch, select your still image for Card Mix again. • When setting Card Mix, you must carry out steps 1 to 5. 123