Canon 45 MC ZR50 ZR45MC Instruction Manual - Page 22

Changing the recording mode E Choose from 4 recording modes: SP (standard play), 1.5× SP, 2× SP or 3× SP. • Only SP and LP modes are available when the camcorder is set to CARD PLAY (VCR) mode. You can record and play back a tape in SP (standard play) and LP (long play) modes. LP extends tape usage by 1.5 times. Recording times (this example uses an 80-minute tape) Standard recording SP 80 min. LP 1.5× SP (120 min.) Extended recording SP 2× SP LP 3× SP (160 min.) (240 min.) - - In SP and LP modes, image data is compressed twice as much as in SP and LP modes when being recorded to a tape. You cant' add sound (audio dubbing) or images (AV insert) to a tape that has been recorded in a mode other than SP mode. If you plan to use either of these functions later, record in SP mode. Mastering the Basics + , + , + TAPE CAMERA TAPE PLAY (VCR) CARD PLAY (VCR) ( 40) VCR SET UP REC MODE••••SP To change the recording mode, open the menu and select VCR SET UP. Then select REC MODE, set it to LP, SP or LP and close the menu. To change to LP mode, open the menu and select VCR SET UP. Then select REC MODE, set it to LP and close the menu. Notes: About all 3 extended recording modes • When recording and playing back tapes in one of the extended recording modes, the nature of the tape and usage conditions may affect recording, mosaic-like noise may appear in the image and the sound may be distorted during playback. For important recordings, therefore, set the camcorder to SP mode. • We recommend recording in SP mode when you plan to transfer images taken with the camcorder to your PC. 22