Canon 45 MC ZR50 ZR45MC Instruction Manual - Page 26
To change the digital zoom, open the menu and select CAM.SET UP., Then select D.ZOOM, set it to OFF
UPC - 013803010510
View all Canon 45 MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
E Magnifies the camcorders' zoom range by up to 20 × in TAPE CAMERA mode. The zoom control continues to work as usual. You can freely zoom in and out between 1× and 360× magnification - the camcorder automatically switches between optical zooming (up to 18×) and digital zooming (18× to 72× or 18× to 360×). + , + TAPE CAMERA CARD CAMERA Mastering the Basics ( 40) CAM.SET UP D.ZOOM 72× To change the digital zoom, open the menu and select CAM.SET UP. Then select D.ZOOM, set it to OFF or 360× and close the menu. Notes: • When zooming, as a rule, keep at least 3 ft 33/8 in (1 m) between you and your subject. However when the zoom is at the wide-angle position, you can focus on a subject as close as 3/8 in (1 cm). • Image resolution is slightly lower when the magnification is greater than 22×/18×. • You cannot use digital zoom in the Night recording program. • You cannot use digital zoom when the multi-image screen is set. The display becomes "--."- • The zoom indicator appears for 4 seconds. When the digital zoom is set to 88×/72×, the zoom indicator extends (light blue). When the digital zoom is set to 440×/360× zoom, the zoom indicator extends again (a darker blue). 26