Canon 45 MC ZR50 ZR45MC Instruction Manual - Page 57
Press the PHOTO button fully down to take the still picture.
UPC - 013803010510
View all Canon 45 MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
• If the subject is unsuitable for autofocus ( 142), the camcorder may not be able to focus, and F may continue to flash white in the display. Continue E to hold the PHOTO button halfway down, then adjust the focus manually with the selector dial. • If you are using manual focus ( 79), the F mark starts as a continuous green mark. Focus with the selector dial. 2. Press the PHOTO button fully down to take the still picture. • The camcorder takes the image immediately, and then records the "photo"to the tape for approximately 6 seconds*. During this time the camcorder also records the sound, and the display shows the still picture. • A counter display appears, and counts up as the camcorder records the picture. F disappears from the display. • The camcorder returns to record pause mode. Notes: • The camcorder automatically returns to record pause mode after recording a still image for approximately 6 seconds*. If you turn the POWER switch to OFF during that time, the camcorder will respond only after recording is complete. • The wireless controllers' PHOTO button has no half-way setting. Press the button fully and the camcorder immediately takes the "photo". • Only take "photos"where it is bright enough to see the image in the display. * 8 seconds in SP or LP recording mode. Using the Full Range of Features 57